您要查找的是不是：
- Using these measures and the ADINA finite element analysis can attain that,compared with the original structure,the maximum stress is loss than 15% of that of the original structure. 通过这些措施及应用ADINA有限元分析得到轴承的最大接触应力降低至不足原结构的15%25。
- ADINA finite element method are adopted. 采用ADINA 有限元分析软件进行分析。
- ADINA finite element analysis ADINA有限元软件
- Three-dimensional finite element analysis of weldin g stress-strain in a girth-butt welded pipe is presented, with a nonlinear FE co de ADINA. 利用ADINA非线性分析程序，考虑材料力学性能依赖于温度变化，对低碳钢管道环焊缝接头进行三维有限元分析。
- Finite element analysis for complex structure. 复杂结构有限元分析。
- Using the finite element analysis software MSC. 摘要采用有限元分析软件MSC.
- This paper analyses nonlinear behaviors and seismic performances of 4 unbonded post-tensioned precast concrete beams with ADINA finite element software. 摘要利用ADINA有限元软件对4个无粘结预应力装配混凝土节点进行了非线性有限元分析，并且对分析结果与试验结果进行了对比。
- The paper uses the theory of thermal performance of composites and finite element analysis software called ADINA to analyze the temperature field and stress field of functional gradient material pistons which have different material gradient equations. 应用复合材料热性能理论,采用有限元分析软件AD INA分析具有不同参数的材料梯度方程的陶瓷纤维梯度增强活塞的温度分布和应力分布。
- In this paper, a polyhedric shell one meter in diameter made of stainless steel during hydrobulging process was analysed by using ADINA finite element procedure. 应用ADINA有限元程序对直径为1米的不锈钢球内接多面壳体液压胀球过程进行了分析。
- Based on these theoretical studies, the temperature stress and shrinkage stress of plain concrete slab and reinforced concrete slab are calculated using finite element analysis software ADINA, and the differences between them are also made. 在此理论研究的基础上，通过有限元分析软件ADINA来计算素混凝土平板构件和配筋混凝土楼板的温度应力和干缩应力，比较其抗裂性能的区别。
- Combine the numeric calculation medal of concrete hydration heat,using ADINA finite element program ,numerically simulates the temperature field of frozen wall and shaft lining. 结合混凝土水化热情况下冻结壁井壁温度场数值计算模型的建立方法,运用有限元软件ADINA建立数值模型,进行冻结壁温度场计算,得出冻结壁温度场分布特性。
- Nonlinear Finite Element Analysis of Reinforced Concrete Transferring Joints. 数字化期刊。钢筋混凝土斜柱转换节点的非线性有限元分析。
- In the flatform,finite element analysis is done on compressor valve plate. 在此平台上,对压缩机阀板进行了有限元分析。
- Keywords : deep pit, spatial finite element analysis, failure model. 关键词深基坑，三维有限元分析，破坏模式；
- By means of the nonlinear finite element analysis commercial code, MSC. 摘要利用三维非线性有限元分析软件-MSC.
- The finite element analysis of reel structure of aut omobile crane is studied. 对汽车起重机卷筒结构的有限元分析方法进行了研究。
- A nonlinear finite element analysis of 4 RC deep flexural simply supported beams with the program VT2 is presented. 摘要使用基于扰动应力场模型的非线性有限元程序VT2分析了4个深受弯简支梁的受力性能。
- A rational method of disposal for a the dowel bar is proposed through test-in-place and finite element analysis. 提出了传力杆的合理布置方式，并通过现场试验和数值模拟进行了分析和验证。
- Its distributing of stress is simulated by finite element analysis software in order to compare their fixedness. 并使用有限元分析软件对不同微桥进行结构分析，以比较其稳固性。
- A finite element analysis system applied to ther mal, electromagnetic and eddy field is introduced. 介绍一种适用于温度场、流场、变磁场、流场及其耦合场的综合性有限元分析软件。
