您要查找的是不是:
- Al alloy matrix composites 铝基复合材料
- The worn surface morphologies of the composites and the Al alloy matrix were observed with a scanning electron microscope. 复合材料具有低的磨损率和稳定的摩擦因数,因此具有良好的耐磨性。
- In situ titanium alloy matrix composites were fabricated by melting casting. 用熔铸法制备了原位自生钛合金基复合材料。
- A partially reinforced Al Si alloy matrix composite piston produced by squeeze casting technique has a firm interface between reinforced and unreinforced... 挤压铸造工艺生产的局部增强铝基复合材料活塞,界面结合可靠、成品率高、工艺兼容性好,作为新型活塞材料,已在我国发动机行业应用并达到批量生产。
- Alumina or aluminosilicate fibers reinforced Al Si alloy matrix composite have more excellent synthetical properties at elevated temperature than the matrix alloys. 氧化铝或硅酸铝短纤维增强铝基复合材料比基体材料有更优异的高温综合性能。
- 15%SiCp/Al alloy matrix composites 15%25SiC颗粒增强铝基复合材料
- Fracture strain of SiC particulate reinforcedaluminum alloy matrix composites 颗粒增强金属基复合材料的断裂应变
- TiNi SMA Wire Reinforced Mg Alloy Matrix Composite TiNi形状记忆合金丝增强镁合金基复合材料
- Mechanical properties of coating particulates reinforced aluminium alloy matrix composites 涂覆颗粒增强耐热铝基复合材料的性能
- Whisker reinforced metal matrix composites. 晶须增强金属基复合材料。
- The Properties of the Zn-Al Alloy Matrix Composites Fabricated by High-intensi ty Ultrasonic Dilution of Exothermic Dispersion XD Denoted in situ Composites 高能超声稀释原位反应烧结块的研究
- cast chromium carbide reinforced Mn-Co-Ni alloy matrix composite 铸造碳化铬增强锰白铜基复合材料
- T2 Cu/2A50 Al alloy was bonded by blacksmith diffusion welding technology. 采用锻接扩散焊法进行了T2铜/2A50铝合金异种材料的焊接。
- Fabrication and processing of metal matrix composites. 金属基复合材料制备加工。
- Ceramic whisker reinforced ceramic matrix composites. 将陶瓷晶须弥散在陶瓷基体内,起增强改善材料性能的复合材料。
- The vacuum differential-pressure casting (VDPC)technol ogy for thin-wall ed Al alloy was introduced. 介绍了用于薄壁铝合金铸件的真空差压铸造工艺。
- The stress-strain date and curve were obtained from the isothermal compression experiment of 7A04 Al alloy. 根据等温压缩实验得出7A04铝合金应力-应变数据,拟合出材料温成形应力-应变曲线。
- This paper discussed the idea of the gas atomization Mg and Mg - Al alloy powder by supersonics high ptire N2 gas. 介绍了用超音速高纯氮气流来生产气雾化镁和镁铝合金粉的设想。
- PM high strength Al alloy is very important light weight material in automobile. 粉末冶金高强度铝合金是重要的汽车轻量化材料。
- Ce conversion film was obtained on surface of Al alloy LY12 by immersion process. 利用浸渍法在铝合金LY12表面上获得了稀土转化膜。