您要查找的是不是：
- Al Cr Zr Ti alloy Al-Cr-Zr-Ti合金
- Cr or Cr - Ti alloy was used in vacuum evaporation. 以金属铬和铬钛合金进行真空蒸镀。
- This type of material includes Al alloy and Al-based composite, and recently the HSRS of Mg_based composite and Ti alloy is investigated. 高应变速率超塑材料主要是铝基复合材料及铝合金，最近，对镁基复合材料、钛合金高应变速率超塑性能的研究也已开始。
- X PHASE IN A Cu Al Ni Mn Ti ALLOY Cu Al Ni Mn Ti合金X相
- Ti alloy is a most perspective material for oralogy due to its excellent mechanical properties and erosion resistance as well as biology compatibility. 钛具有优异的力学性能,良好的耐蚀性和生物相容性,已成为口腔医学中最有发展前途的金属材料。
- A new method is developed to deposit DLC film on surface of Ti alloy by liquid-deposition. 采用液相电解甲醇法，首次在钦合金表面沉积得到DLC膜。
- Fracture toughness test on Ti alloy BT20 and laser-welded joints was carried out. 摘要对BT20钛合金及其激光焊接接头的断裂韧性进行了研究。
- It indicates that wollastonite coating is tightly bonding to Ti alloy substrate. 相近的热膨胀系数使硅灰石涂层能与钛合金基体牢固的结合。
- The solid lubricant treated wheel was developed in order to improve the grindability of Ti alloy. 固体润滑剂渗渍涂层砂轮可以改善钛合金的磨削性能。
- WT5”BZ][ST5”BZ]High energy density electron beam is employed in surface rapid solidification on Ni plated Ti alloy. 采用高能量密度电子束进行了钛镀镍合金表面熔凝处理的研究。
- The WC-CO coating produced by electrospark deposition on Ti alloy can effectively improve substrate,s wearing resistance. 利用新型电火花强化技术,在钛合金材料表面强化WC-Co,可形成具有高耐磨性能强化层表面。
- Near edge X-ray absorption fine structure studies for the local structure of alloy Fe Mn Al Cr 铁锰铝铬合金局域结构的近边X射线吸收精细结构研究
- The microstructure, properties and impact fracture toughness of welded joints of Ti and Ti alloy by using tungsten-argon arc welding were studied. 研究了钛及钛合金经钨极氩弧焊焊接接头的显微组织、力学性能和冲击断裂特征。
- In this paper, Influence of deposition condition on diamond-like carbon （DLC） films by liquid deposition on the surface of Ti alloy was discussed. 探讨了用液相电解沉积法在钛合金表面制备类金刚石薄膜的新方法。讨论了不同沉积条件对膜的影响。
- The properties of Ti alloy are mainly determined by com position and microstructure, which depend on the melting process of Ti alloy imm ediately. 钛合金具有比强度高、耐腐蚀等一系列优良特性，是新一代结构材料的代表。钛合金的性能很大程度上取决于合金的成分及组织。
- Diamond-like carbon films deposited on surface of Ti alloy can improve hemo-compatibility of Ti alloy and enhance the application as body-implanted materials. 在钛合金表面沉积类金刚石膜能改进钛合金的生物相容性，拓展其在人体植入材料中的应用。
- Microstructure characteristics of repairing welded joint of TA15 Ti alloy were analyzed by optics microscope, X-ray diffraction and electron probe microanalysis. 采用光学显微镜、X射线衍射仪和电子探针等测试手段分析TA15钛合金熔焊接头补焊微观组织特征,探讨钛合金焊缝多次补焊的可行性。
- Purpose: To investigate if the inlay Ti Alloy (stapling apparatus) cancause the local heat accumulation effect and the intestinal ambustion inwhole body microwave heating. 目的：探讨在全身微波加热中，内置钛合金(胃肠吻合器)是否会引起肠道组织局部热积聚以及肠道热灼伤。
- Liu D X, Tang B, Pan J D, et al.Investigation on glow-discharge ionized nickel-chromizing with arc source of Ti alloy and its properties[J].Materials Engineering,2000,(10):11-14. [1]刘道新;唐宾;潘俊德;等.;钛合金表面加弧辉光离子渗镍铬及其性能研究[J]
- Al causes operated to bring about the war. 那场战争的起因有几个。
