您要查找的是不是：
- Key words axially grooved heat pipe； 本刊中 包含“轴向槽道热管；热源位置；
- Axial grooved heat pipe 轴向槽道热管
- axially grooved heat pipe 槽道热管
- Axially grooved heat pipe(AGHP) 轴向槽道热管
- miniature heat pipes with axial grooves 微小型轴向槽道热管
- EXPERIMENTAL STUDIES OF THE SMALLAXIALLY GROOVED HEAT PIPE WORKING AT THE LIQUID NITROGEN TEMPERATURE RANGE 液氮温区小型轴向槽道热管的实验研究
- Experimental investigation of heat transfer characteristics inside a flattened mini-axial grooved heat pipe 槽道热管压扁度对传热的影响
- Theoretical and Experimental Investigation on Flow and Heat Transfer in a Flat Miniature Heat Pipe With Axial Grooves 微小型多槽平板热管的流动和传热分析及实验研究
- grooved heat pipe 槽道热管
- Harbin DawnHappy Heat Pipe Technology., Inc. 哈尔滨晨怡热管技术有限公司。
- Capabilities and management of a heat pipe cooling device. 加热管制冷设备的功能和管理。
- The heat pipe shall be packaged not to be damaged in transportation. 热管在运输过程中包装不应受到破坏。
- This paper presents a novel design of the secondary evaporator with axial grooves on its internal surface of a cryogenic LHP. 首次采用槽道热管作为低温回路热管的次蒸发器，并对其在加快主蒸发器降温过程中的作用进行了详尽的实验研究。
- The dimensional attributes of this heat pipe shall conform to the following drawing. 热管的直径及大小和下图一致。
- The study of high freezing-rate facilities using Natural Coldness Resource (NCR) was analyzed according to the heat pipe technique in this paper. 摘要通过试验并加以理论分析，研究开发高结冰率的自然冷源贮藏设备。
- The high temperature heat pipe fin (HTHPF) is quite a short heat pipe with liquid metalmedium. 高温热管翅是一种极为短小的、以液态金属为工作介质的小热管。
- A mini-ejector and a heat pipe with capillary structure in this new system perform a flow cycle of the working fluid. 该系统利用喷射器代替压缩机,利用热管内的毛细芯实现工质循环。
- This study reports the investigation of the heat transport capacity enhancement in miniature loop heat pipe (mini-LHP). 本文旨在研究小型化迴路式热管之热传增强效应。
- According to the process of the air-textured yarn,the heat pipe is designed and illustrated in detail. 根据变形纱的加工工艺,设计了热管加热器,并对其结构进行详细的说明。
- According to the research of rolling processing technology,we develop some simple rolling head of striated groove heat exchange tubes which can be processed on ordinary lathe. 根据滚轧加工技术研究开发了一种简单的、能在普通车床上加工横纹槽换热管的滚轧头。
