您要查找的是不是:
- Boron carbide coating 碳化硼涂层
- The results expatiate that boron carbide ceramics can be sintered in low temperature by approaches mentioned above. 结果表明,通过以上几种途径可以实现低温烧结。
- Boron carbide nanotubes(nano-fibers) was prepared by boron powder and carbon nanotubes(CNTs) at high temperature in a quartz tube after being vacuumed. 以碳纳米管为原料,利用真空封管技术在高温下用硼粉对碳纳米管进行掺杂处理,获得了碳化硼纳米管(纤维)。
- Boron carbide can be obtained by means of thermal decomposition of triethylborane, tripropylborane and tributylborane, respectively. 以合成的三乙基硼、三丙基硼和三丁基硼为原料通过热裂解制备纯度较高的碳化硼超硬材料;
- This paper introduces several measurement methods of boron carbide micropowders, analysis condition of use and performance of each instrument. 介绍了在碳化硼微粉检测中几种常用的粒度测量仪器,对各自的使用情况和性能特点进行了分析。
- With active carbon and silicon carbide as sintering aids,the boron carbide ceramic materials were prepared by using vacuum hot pressing sintering. 以活性炭和碳化硅为烧结助剂,采用真空热压工艺,制备了碳化硼陶瓷材料。
- Erosive wear behavior of chemical vapor deposited multilayer tungsten carbide coating. 化学气体的侵蚀损耗作用形成多层碳化钨外壳。
- The topographical characteristics of the boron carbide sample surfaces were investigated with atomic force microscope/friction force microscope (AFM/FFM). 用原子力/摩擦力显微镜对碳化硼样品进行了表面形貌的微观分析。
- Abstract: The topographical characteristics of the boron carbide sample surfaces were investigated with atomic force microscope/friction force microscope (AFM/FFM). 摘 要: 用原子力/摩擦力显微镜对碳化硼样品进行了表面形貌的微观分析。
- Different measurement methods of boron carbide micropowders of FEPA standard were analysed,the linear relation among the laser、sedimentation and resistance analyzer was obtained. 通过对F标准碳化硼微粉不同检测方法的对比分析,得出激光粒度分析仪与沉降管、电阻颗粒计数器检测结果之间的线性关系,其结果对生产具有指导意义。
- Boron carbide nanotubes (nano-fibers) was prepared by boron powder and carbon nanotubes (CNTs) at high temperature in a quartz tube after being vacuumed. 摘要以碳纳米管为原料,利用真空封管技术在高温下用硼粉对碳纳米管进行掺杂处理,获得了破化硼纳米管(纤维)。
- LI Ping, WANG Shui-lan, GAO Ji-qiang, et al.Therma desposition of boron carbide powder in vaccum [J].Weapon Materials Science and Engineering, 1998,21(3): 36-40. [3]李平;王水兰;高积强;等.;碳化硼粉末的真空热处理净化研究[J]
- Thermal Diffusion Carbide Coating Process 热扩散法碳化物覆层处理
- Keywords boron carbide;elasticizer and reinforce;frictional wear;coating; 碳化硼;增韧补强;摩擦磨损;涂层;
- abrasion resistance of vanadium carbide coating 碳化钒覆层
- The development and research status of boron carbides for the Bulletproof Ceramic were summarized in this article. 本文综述了碳化硼抗弹陶瓷材料的发展和研究现状。
- I got a new coat in that store last week. 上礼拜我在那家店买了一件新外套。
- The Boron Carbide Abradant Plant of Mudanjiang City 牡丹江市碳化硼磨料厂
- Silicon carbide coatings were prepared on the surface of C/C composites by chemical vapor reaction(CVR) with three different processes,and the oxidation resistance of SiC coatings was also measured. 采用化学气相反应法,以3种不同工艺在C/C复合材料表面制备了SiC涂层,并检测了其抗氧化性能。
- The alterations to your coat will take a week. 你的外衣改一改要花一个星期。