您要查找的是不是：
- Clamp of Neutral Point Drift 零点漂移钳位
- It was shown that the position of neutral point of pile shaft varied with the consolidation of surrounding soil and the magnitude of pile-head load. 利用该模型分析了大面积堆载下，在桩顶作用大小不同的竖向荷载以及桩侧土达到不同固结度时再施加桩顶荷载情况下，桩身摩阻力的发展变化规律。
- Based on golden section method, the author has established Gan-Chen model which accurately obtain that the position of neutral point and mid-point is located at 0.382 L and 0.618L, respectively. 笔者应用黄金分割原理建立的Gan-Chen模式;能正确地计算出:桩的中和点在0.;382L处; 中性点则在0
- The results show that the location of neutral point and distribution of skin friction of pile shaft and pile capacity vary with the surrounding soil consolidation and the pilehead loading conditions. 研究结果表明，桩身中性点位置、桩身负摩阻力随地基土的固结逐渐变化：在地基土固结过程中，桩承载力逐渐减小。
- voltage balance of neutral point 中点电压平衡
- control of neutral point potential 中点电压控制
- Higher Voltage of Neutral Point in 66 kV Network and its Treatment 66 kV系统中性点电压较高的原因及解决办法
- Has the Time of Neutral Clothing Come? 服装进入了中性化时代了吗?
- I am doing an experiment of neutralizing acid. 我在做一个中和酸的实验。
- A New Model Earth - Protector of Neutral Point Earth - Free Main line 新型中性点非直接接地电网的接地保护
- The act or process of neutralizing. 使中立使中立的做法或过程
- Discussion on Grounding Way of Neutral Point Through Resistance at EF of Bagang 八钢电炉中性点电阻接地方式的探讨
- Choice of Grounding Method of Neutral Point in High Voltage Distributing Net 高压配电网中性点接地方式的选择
- Trim Maintaining a state of neutral buoyancy at a given depth. 平衡,保持潜艇在特定深度悬浮状态的动作。
- neutrality point drift 中性点漂移
- A few problems of neutral point operation mode in electric power system 关于电力系统中性点运行方式的几个问题
- VT breakdown reasons and treatment methods of neutral point contact gap of GIS GIS中电压互感器中性点接地间隙击穿原因及处理方法
- The text introduces the design method and construction of the welding junction clamp of motorcar. 本文介绍了汽车焊装夹具设计的一些常用设计方法及结构形式。
- The neutral point of view is a means of dealing with conflicting views. 中立观点是处理相冲突看法的一种手段。
- Chapter four stdudies how to improve the tradition flexible grid clamp of the Aliform-Aluminium adiators. 第四章对传统真空钎焊用柔性格栅夹具的进行改进的研究；
