您要查找的是不是：
- The influences of heat treatment on structure micro hardness, static corrosion resistance in normal temperature and hot solution corrosion resistance of electroless Ni P and Ni Co P alloy coatings were studied. 研究了热处理对化学沉积Ni－P、Ni－Co－P合金镀层的组织结构、显微硬度、常温静态腐蚀性能和热溶液腐蚀性能的影响。
- This paper deals with the adhesive state of amorphous Ni P alloy plating using impact fracture test method and also measuring the adhesive strength of the plating quantitatively. 用金相冲击断口法研究了化学沉积非晶态镍磷合金层与基体的结合状况，并用扭转法定量测量了化学沉积合金层的附着强度参数。
- A Study on Fe Ni P Alloy Plating 铁-镍-磷合金电镀的研究
- Co - Ni - P alloy Co-Ni-P合金
- Keywords electroplating;Ni P alloy;sodium hypophosphite; 电镀;镍磷合金;次亚磷酸钠;
- Ni - Co - P alloy Ni-Co-P舍金
- This method is able to measure Mn,Cu,Pb,Zn,Co,Ni and P quickly. 该方法也可同时用于:Mn、Cu、Pb、Zn、Co、N i、P等杂质元素的快速测定。
- Chen BH.Hong L.Ma Y.Ko T M Effects of surfactants in an electroless nickel - plating bath on the properties of Ni - P alloy deposits 2002(41 刘新宽.;向阳辉
- Application of Baird ICP 2070 sequential scan plasma spectrometer to determine Ag, Al, B, Ba, Be, Cd, Co, Cr, Cu, Hg, Li, Mn, Mo, Ni, P, Pb, Sb, Ti, Tl and Zn in surface water, industrial wastewater, soil, plant and alloy samples. 利用Baird ICP 2070顺序式扫描等离子体光谱仪,对地面水、工业废水、土壤、植物等多种环境样品以及合金中的Ag、Al、As、B、Ba、Be、Cd、Co、Cr、Cu、Hg、Li、Mn、Mo、Ni、P、Pb、Sb、Se、Sn、Ti、Tl、Zn23种元素进行分析测定。
- A metal compound,such as Ni(CO)4,containing the CO group. 含羰基的金属化合物，如Ni（CO）4
- Yangxin Aluminum Alloy Wheel Co. 阳新驰骋铝轮有限公司。
- Screw Steel or brass alloy with Zn or Ni plating. 端子螺栓以钢或铜合金为原料，表面再加以镀锌或镀镍等处理。
- Chiyoda Mutual Life Insurance Co. 千代田寿险公司(日本)
- I mind my p's and q's whenever I see him. 每当我见到他我都谨慎行事。
- In English, b, p, m and w are bilabials. 英语中的b、p、m、w为双唇音。
- A metal compound, such as Ni(CO)4, containing the CO group. 含羰基的金属化合物，如ni（CO）4
- Ni - Mo - P alloy deposits Ni-Mo-P合金镀层
- AB and CD intersect at (the point) P. AB线和CD线在P点相交。
- The time now is 10:00 p, m, sharp. 现在的时间是晚上10点整。
- The Ni Cu alloy supported on TiO 2 promote the formation of C 2 hydrocarbons in CO hydrogenation. 双金属Ni、Cu间发生相互作用而形成了均匀的合金相，该活性组分与载体TiO2的共同作用，对CO加氢中C2物种，特别是乙烯的生成有利。
