您要查找的是不是：
- Argon DC Glow Plasma 氩直流辉光等离子体
- DC glow plasma 直流辉光等离子体
- Mo alloy layer is formed by double glow plasma alloying process. 然后作固溶处理,使金属间化合物溶于基体中;
- With improved Monte Carlo technique, the influence of a transverse field on the electron transport parameters in the cathode region of a DC glow discharge is studied. 本文运用改进的蒙特卡罗技术,研究了横向磁场对氦气直流辉光放电阴极区电子输运过程的影响。
- Measurements of rotational temperature as low as several hundred Kelvin have been achieved using optical emission spectroscopy (OES) in nitrogen DC glow discharge. 由于我实验室正从事氮气直流辉光放电磁控溅射石墨靶生长CN膜的研究，作为该课题的一部分，我们的目的是利用发射光谱法测量氮气直流辉光放电中的转动温度，从而实现对靶的生长环境的控制，从中得到有意义的结论。
- It presents an advanced and effective approach to the prediction of properties of the double glow plasma carbonizing. 试验结果验证了性能预报神经网络模型的可靠性，为解决双辉离子渗碳性能预报问题提供了一条先进、合理的途径。
- High conversion of feed and yield of CO were obtained in abnormal glow plasma reaction of CH4 and CO2 mixture at atmospheric pressure. 反应转化率均随输入功率的增大而增大,随放电间距的增大而增大,随反应原料气流量的增大而减小; 产物中H2/CO摩尔比随原料气中CH4含量的增加而增大。
- The type, constitutes, function, structure, principle of double glow plasma discharge alloying process equipment for surface was briefly introduced. 简要介绍了双层辉光等离子表面合金化设备的类型、组成、功能、结构、原理等。
- In double glow plasma surface alloying(DGPSA), the alloy poorness insurface layer of the workpiece is mainly caused by two mechanisms. 离子渗金属中,工件表层合金贫化主要通过两种机构发生。
- Using the double glow plasma hydrogen-free carburizing method carry through surface strengthen to enhance titanium alloy surface intension,Can avoid brittleness. 采用双层辉光离子无氢渗碳的方法对钛合金进行表面强化处理,提高了钛合金的表面强度,改善了其耐磨性；同时避免了氢脆的产生。
- Using the double glow plasma hydrogen-flee carburizing method carry through surface strengthen to enhance titanium alloy surface intension,Can avoid brittleness. 采用双层辉光离子无氢渗碳的方法对钛合金进行表面强化处理,提高了钛合金的表面强度,改善了其耐磨性;同时避免了氢脆的产生。
- Simulation of electron motion and its energy in the Ar DC glow discharge plasma 氩直流辉光放电等离子体中电子运动及能量的模拟
- For2Cr13 valve sealing face by double glow plasma W alloying process,carburizing , quenching and tempering process, the results show its machining size is little, its hardness is high and its static pressure lifetime is long. 结果表明经双层辉光离子渗钨、渗碳和淬火回火处理的2Cr13阀门密封面加工量小、硬度高、静压寿命长。
- Characteristics of Cr-Ni-Mo-Co Surface Allying Layer Formed by Double Glow Plasma Alloying Technique[A].Proceedings of 6th International Symposium on Test and Measurement(Volume 5)[C], 2005 . 张高会;张平则;葛洪良;崔玉建;姜纬棣;徐重.;钛合金双层辉光放电离子无氢渗碳制备工艺研究[A]
- Characteristics of Cr-Ni-Mo-Co Surface Allying Layer Formed by Double Glow Plasma Alloying Technique[A]Proceedings of 6th International Symposium on Test and Measurement(Volume 5)[C], 2005 . 张高会;张平则;葛洪良;崔玉建;姜纬棣;徐重.;钛合金双层辉光放电离子无氢渗碳制备工艺研究[A]第九次全国热处理大会论文集（二）[C];2007
- DC GLOW DISCHARGE PRODUCED COLD PLASMA EMPLOYED IN THE SURFACE MODIFICATION OF MACROMOLECULAR MATERIALS 直流辉光放电冷等离子体在高分子材料表面改性上的应用
- The Experimental Investigation on Double Stable State of DC Glow Discharge Plasma with Long Positive Column 具有长正柱区直流辉光放电等离子体中双稳态现象的实验研究
- Argon Plasma Generated by DC Glow and Magnetron Assisted Discharge: a Study of Spatial Resolved Optical Emission Spectroscopy 直流辉光和磁控增强放电等离子体的空间分辨发射光谱技术
- Change of source cathode by double glow plasma 双层辉光离子多元共渗中的源极变化
- Modification of Glow Plasma Nitriding Furnace 辉光离子氮化炉的改造
