您要查找的是不是：
- Exotherm termil 百菌清
- All fillers lowered the maximum exotherm. 所有填料都降低放热效应。
- The DTA curve of the fine clay fraction exhibits a major exotherm near 340℃. 这种细粒土级分的DTA曲线接近340℃处有一个很大的放热峰。
- DSC was used to measure the exotherm during curing of the blend resin system. 3．通过DSC测试了共混树脂的固化放热性能，并比较了共混树脂在两类不同室温固化体系下的放热性能。
- Because many roasting systems exhibit thermal hysterysis using simple temperature regulating schemes, care must be taken not to allow the coffee mass to exotherm. 因为许多烘焙系统使用简单的温度调节机理，这些系统会表现出热滞后效应，所以一定要很小心，不要让咖啡放热。
- Excessive dispersion time at high speed causes temperature build-up which can result in marked viscosity reduction, with severe splashing at least, and the possibility of a dangerous exotherm. 过多的分散时间会升高温度，粘度降低，导致漆料溅出，可能的放热危险。
- And by compare the exotherm of the resin cured by two kind of curing system at room temperature we can found that the resin we synthesized has lower exotherm, especially when use BPO as initiator.4. 证明该树脂体系具有较低的固化放热峰，而且表明以过氧化苯甲酰作为引发剂具有更低的放热峰温度。
- STUDY ON THE EXOTHERM IN CURING PROCFSS OF EPOXY RESIN 环氧浇铸体固化过程放热研究
- the use of filler decreased the exotherm of diamine cure,but incr... 胺固化的冲击强度较高,加入填料可提高拉伸强度。
- Termil 四氯间苯二甲腈[杀真菌药, 杀菌药, 杀线虫药]
- polymerization exotherm 聚合放热
- curing exotherm 固化放热
- exothermn. 温升
- 12.Excessive dispersion time at high speed causes temperature build-up which can result in marked viscosity reduction, with severe splashing at least, and the possibility of a dangerous exotherm. 过多的分散时间会升高温度，粘度降低，导致漆料溅出，可能的放热危险。
