该词条未找到_海词词典

您要查找的是不是：

How to use ABAQUS finite element software to set up the strengthen structural model of ACSR is explained in detail. 详细阐述了应用ABAQUS有限元软件建立拱形波纹钢屋盖增强结构模型的全过程。
Based on the finite element software ANSYS, the CFRP-confined concrete square columns were numerically simulated. 基于有限元程序ANSYS,对碳纤维布约束混凝土方柱进行了数值模拟。
Initial thermo-deformation has been calculated by using finite element software 'ALGOR'. 初始热变形曲线是应用有限元软件ALGOR计算获得的。
The cemented carbide drawing die was optimal designed by the finite element software ANSYS. 采用ANSYS有限元软件对硬质合金拉伸模结构进行了优化设计。
In chapter four, the calculational results are given based opn non-lineary finite element software ABAQUS. 第四章介绍了采用非线性有限元软件ABAQUS对薄壁管有限元模型的数值计算。
The sustainability of perforating casing with screw holding is analysed by using the finite element software ANSYS. 文章利用ANSYS有限元分析软件,对螺旋布孔射孔套管的承载能力进行了分析。
The method makes full use of the outputs of existing finite element software and needs low self-programming. 该法充分利用了现有的有限元软件的输出结果，自编程序的工作量很小。
From the meso aspect, this paper used Fortran language and Ansys finite element software to establish a 3-D meso concrete model. 细观上，利用Fortran语言和Ansys有限元软件建立了可考虑交界面单元细化的三维混凝土细观有限元模型。
With size optimization of finite element software,the aluminum alloy hood is designed based stiffness and an improved design is put forward. 借助有限元软件基于刚度对铝质发动机罩进行了尺寸优化设计并提出了一种改进方案。
The welding procedure of thermal and mechanics in unclosed hoop weld on the thin structure was simulated using finite element software ABAQUS. 摘要运用有限元计算软件ABAQUS，对薄壳结构非封闭环焊焊接热力学过程进行了数值模拟。
Split Hopkinson pressure bar (SHPB) tests on C100 and C80 concrete specimens were simulated with explicit dynamic finite element software LS-DYNA. 摘要用显式动力有限元软件LS-DYNA，模拟C100与C80高强混凝土SHPB试验过程。
This thesis builds “635”hydro-junction project headrace model without cracks and model with cracks in finite element software ANSYS. 本文在有限元软件ANSYS中,建立“635”水利枢纽工程导流洞无缝状态下的模型和带缝状态下的模型。
With size optimization of finite element software, the aluminum alloy hood is designed based stiffness arid an improved design is put forward. 借助有限元软件基于刚度对铝质发动机罩进行了尺寸优化设计并提出了一种改进方案。
This paper uses ANSYS/LS-DYNA of dynamic finite element software to analyse dynamic response of buried gas pipelines caused by rockfall impact. 本文利用ANSYS/LS-DYNA动力有限元软件分析了落石冲击作用下埋地输气管道的动力响应。
Abstract : Simulation for blast-resistant doors under explosion load is processed in this paper with the dynamic finite element software of LS-DYNA. 摘要：本文利用动力有限元分析软件LS-DYNA，分析了某系列抗爆门在爆炸荷载作用下的动力反应。
Finite element software ANSYS7.0 is employed to analyze the interlaminar shearing stresses of C_f/epoxy composite tubes under axial loading. 利用有限元程序ANSYS7.;0对软模膨胀成型制备的碳/环氧管件在轴向载荷下的层间剪应力进行了分析。
The CAE technology and PATRAN finite element software were used in three-dimension simulation and analysis for three axis turntable frame system. 三轴转台框架系统的三维模拟与分析,采用CAE技术,使用PATRAN有限元软件。
The paper checks the safety and stability of shoulder pole girder for hoisting large dynamotor stator with finite element software ANSYS. 摘要利用大型通用有限元分析软件ANSY，对国泰电厂大型发电机定子吊装用横梁结构进行设计方案的安全稳定性校验。
Numerical simulation of the vacuum hot bulge forming of BT20 Titanium alloy was carried out using the finite element software MSC. 建立了BT20钛合金筒形件真空热胀形的二维非线性准静态热弹塑性有限元模型。
Based on coupled field-circuit model, the magnetic field and inductance of air-core reactor are computed by using finite element software. 基于场-路耦合计算模型,采用有限元软件对干式空心电抗器的磁场和电感进行了计算和分析。