您要查找的是不是：
- Firstly,the pressure distribution of gas solid flow along the circulating route is analyzed and experimentally studied. 分析气固两相流在循环路径中的压力分布，并通过试验对其进行了研究。
- The influence of the arrangements of pipes on gas solid flow characteristics in the dense section of standpipe in the circulating fluidized bed is studied on a cold state experiment platform. 在冷态试验台上研究了循环流化床料腿密相段中不同管束布置方式对气固流动特性的影响。
- WT5”BZ]The experimental study of a gas solid flow pattern and gas diffusion characteristics using polystyol particles and glass bead has been carried out in a pressurized spouted fluidized bed. 在一个加压喷动流化床装置上进行了冷态实验,研究加压条件下床中的气固流动状态和气体在各部分的扩散特性。
- Keywords numerical simulation;dense gas solid flow;distinct element method;fluidized bed;Eulerian Lagrangian model; 数值模拟;密相气固两相流;离散单元法;流化床;欧拉拉格朗日模型;
- STUDY ON THE GAS SOLID FLOW CHARACTERISTICS IN THE PRE LIFT ZONE OF FCC RISER 催化裂化提升管预提升段气固两相流动特性的研究
- Keywords mould filling;solid flow model;vectorial algorithm;finite element method;experiment in-vestigatation; 注塑填充;实体流模型;矢量化算法;有限单元法;实验验证;
- Numerical investigation on characteristics of gas solid flow in two phase rotary flow 气固两相旋流中气粒两相流场特性数值模拟
- gas solid flow 气 固怜
- The gas penetration in the process of gas assisted injection molding is presented by generalized Hele Shaw flow model. 基于广义Hele-Shaw流动模型描述了气体辅助注射成型时气体的穿透过程。
- Flue gas flow model is established based on gas flow to research the pressure distribution along the width of furnaces. 运用气体流动相关知识，建立炉气流动模型，研究沿炉宽方向上的压力分布。
- The one-dimensional two-phase flow model of solid propellant electrothermal chemical gun (SPETCG) is established in the paper. 该文建立了固体工质电热化学炮（SPETCG）内弹道一维两相流模型。
- I think IBM 150 million dollars in cash flow model Lane off too permeated. 我想IBM在150亿美元的现金流模型里过得太滋润了。
- With increasing nozzle size,solid flow rate and loading both decreased. 喷嘴直径增加时,固体流速和固体相含率都降低;
- Based on the gas flow model in gas reservoir and the fluid flow model in horizontal well, a couple model is developed and used for numerical computing study of single flow performance in horizontal borehole. 摘要根据气藏内气体的流动模型和水平井井筒内流体的流动模型，建立了耦合模型，通过该耦合模型对气藏中的水平井井筒内单相流动特性进行了数值计算研究。
- Different solutions may be exactly the same cash flow model, but it falls far short of nature caused the effect. 不同的解决办法可能会产生完全相同的现金流模式,但却导致性质上相差甚远的效果。
- Pentachlorobenzene cyanide was synthesized by means of gas solid catalysis and chlorination using cyanobenzene and chlorine as the raw materials. 以苯甲腈和氯气为原料，用气固催化氯化法研制了五氯苯甲腈。
- A power flow model for analyzing multi axis off road vehicle transmission is built and the solution is given. 提出用功率流模型来分析多轴越野车的传动系统 ;建立了传动系统各主要部件模型以及整车传动系统的功率流模型 ;并给出了求解算法 .
- Not only were there the gas solid two phase turbulent flows, but also there were heat transfer and cracking reaction in the commercial flow catalytic cracking(FCC) riser reactors. 工业催化裂化提升管反应器内既存在着气固两相的湍流流动，又存在着传热和裂化反应，而且这些过程是相互影响、高度耦合在一起的。
- For the calculation of the viscosity coefficient, bring in the Baldwin-Lomax algebra fast flow model. 为了计算黏性系数,引入了Baldwin-Lomax代数湍流模型。
