您要查找的是不是:
- Hot wire plasma arc surfacing 热丝等离子弧堆焊
- In recent years, high power density beam powder surfacing techniques have been developing rapidly,such as plasma arc surfacing,electron beam surfacing,laser surfacing and focusing light surfacing. 近年来,高能束粉末堆焊技术凭借其特有的优势得到了迅速的发展。
- Structure and Hardness of Nickel-based Alloy Plasma Arc Surfacing 镍基合金等离子弧堆焊组织结构和显微硬度
- Composition Optimization of Composite Powder for Plasma Arc Surfacing 等离子弧堆焊复合粉末成分优化设计
- MICROSTRUCTURE OF THE COBALT- BASE ALLOY POWDER PLASMA ARC SURFACING 钴基合金粉末等离子弧堆焊的显微结构
- Study on Properties of Nickel-based Alloy Powder by Plasma Arc Surfacing 镍基合金粉末等离子弧堆焊层的性能研究
- The hot wire is caused by overload. 电线发热是由于过载造成的。
- Magnetic field control on microstructure and properties of plasma arc surfacing layer 等离子弧堆焊层的组织与性能的磁场控制
- Microstructure and wear resrstance of copper base alloy surfacing weld of plasma arc surfacing 等离子弧喷焊铜基合金的组织和耐磨性
- Seasoned crooks can hot wire a car in seconds. 手段高明的窃贼可在几秒钟内用电启动来发动汽车。
- plasma arc surfacing welding 等离子堆焊
- plasma arc surfacing 等离子弧堆焊,等离子弧埋焊
- The liberation of electrons from a hot wire is called thermionic emission. 电子从热灯丝逸出,叫做热电子发射。
- Effect of the Unit Length Energy on the Hardening Depth by Plasma Arc Surface Quenching 等离子弧表面淬火的单位长度能量对硬化深度的影响
- Applying TIG hot wire process, It is applied to continuous joining production line of tubes in boiler industry. 采用TIG热丝焊接工艺,主要应用于锅炉行业直管加长焊接生产线。
- The simulation results agreed with the experimental results of hot wire anemometer and particle image velocimetry (PIV). 模拟结果与采用热线风速仪以及激光粒子成像技术(PIV)测定的实验结果基本吻合。
- The transient hot wire method is used to measure the thermal conductivities of CuO nanofluids at the different ovlume fraction and temperature. 介绍了运用瞬态热线法测定不同体积份额、不同温度下水-氧化铜纳米流体的热导率。
- Welding equipment includes automatic plasma arc and TIG hardfacing machines. Only a few typical machines are shown here. 焊接设备包括自动等离子弧和TIG表面硬化机械设备。在此只展示少数典型设备。
- Lefty hot wired the car and used it for an hour or two. “左撇子”用点火器电线短路方法发动了汽车,然后连续开了一两个小时。
- Boundary layer characteristics at the trailing edge of a tiltrotor blade model were measured using a flattened pitot probe and a single hot wire. 本研究以二体势能函数建立一套接触式原子力显微镜定力模式之模拟奈米级量测模型。