您要查找的是不是：
- in situ reinforced concrete deck slab 就地建筑的钢筋混凝土桥面板
- In situ Al 2O 3 and TiB 2 particles reinforced Al 3.2% Cu and Al 6.0%Cu alloy composites were fabricated from TiO 2 Al B CuO system. 由TiO2?Al?B?CuO体系制备了原位Al2O3和TiB2粒子增强Al?3.;2%25Cu和Al?6
- Reason Analysis and Handling Method of Cracking for Cast in Situ Reinforced Concrete Beam and Floor in a Frame Building 一幢现浇钢筋混凝土框架房屋梁板裂缝原因分析与加固处理
- In this paper, a new in situ technique has been used to fabricate discontinuously reinforced titanium matrix composites. 而本研究则采用原位合成工艺制备非连续增强的钛基复合材料。
- Key around Mobile, the next key stop in situ fixed. 左右键移动,下键停在原地不动。
- Lobular carcinoma in situ is seen here. 图示小叶原位癌。
- Fluorescence in situ hybridization See FISH. 荧光原位杂交：参见FISH.
- The results show that: 1) Barium aluminosilicate composites reinforced in situ mullite rodlike crystals can be fabricated in clay-alumina-barium carbonate system. (2)两个原料体系烧成试样的相组成不同影响其致密化程度;
- RDP＝rumen-degradable protein measured in situ. 经瘤胃消化袋测得之瘤胃可分解蛋白质。
- Biopolymer can be triggered in situ to form a gel. 对生物矿化作用的进一步研究有助于微生物调剖机理的完善和应用。
- The rocks were not in situ; they had been brought from elsewhere. 石块不是原来就在那里的，是从别处搬来的。
- HA porous prepreg reinforced PMMA composites were prepared byimpregnation method and in situ mass polymerization. Viscosity of PMMAprepolymer and temperature of in situ mass polymerization were critical to thepreparation of composites. HA多孔坯体增强有机玻璃(PMMA)复合材料可以采用坯体预浸渍PMMA低粘度预聚体后,再原位聚合的方法制备,PMMA预聚体的粘度、原位本体聚合的温度是复合材料制备的关键因素。
- In situ deposits are dark shale with horizontal bedding. 原地沉积为水平层理发育的暗色泥板岩。
- Many glass reinforced composites are translucent when removed hot from the press. 许多玻璃增强复合材料从热的压机上取下时是透明的。
- By "multicomponent systems" polymer chemists mean polymer blends, copolymers and reinforced composites. 聚合物化学工作者所称的“多组分体系”是指聚合物共混体，共聚物和增强复合材料。
- Objective To develop a new type of fiber reinforced composites(FRC) posts with optimal bent angles. 目的研制一套具有不同弯曲角度的牙科纤维增强复合材料(FRC)桩钉,探讨弯曲角度对FRC桩钉性能的影响。
- In Situ Hybridization on Vasa Gene of Silkworm Bombyx Mori. 家蚕vasa基因的原位杂交研究
- High quality preforms are important for discontinuously reinforced composites made by the pressure infiltration method. 摘要采用压力浸渗方法制备非连续增强复合材料需要高质量的预制块。
- Fluorescence in situ hybridization (FISH) technique developed. 发明原位免疫荧光杂交(FISH)技术.
- With the aid of excellent properties, CF Reinforced composites (CFRP) get widely use in each socity field. 碳纤维复合材料以其优异的性能，在社会各领域都得到了广泛的应用。
