您要查找的是不是：
- Liquid pressure loading paths 液压加载路径
- For all types of liquid pressured spray. 与各种液体加压喷雾。
- The cyclic hardening behavior under different loading paths and different load conditions was studied. 讨论了材料在不同加载路径及不同工况下的循环硬化特性。
- The systematic analysis of CCFT bending-torsion member was performed considering different loading paths. 考虑不同弯扭作用的加载路径，对弯扭构件进行了全过程分析。
- The loading paths in the tube hydroforming have the critical effects on the final part quality. 加载路径对液压胀形件的最终质量有着至关重要的影响。
- Three alterable experimental parameters were chosen: liquid pressure, flux and electrostatic voltage. 试验选择了3个可变操作条件：液体压力、液体流量及静电电压情况下。
- Dieless hydro-bulging is a forming technology under inner liquid pressure applied to closed shell. 无模液压胀形是对封闭壳体施加内压力的一种成形方式。
- The ARV wall may have thickened due to systemic pressure load, resulting in reduction of wall motion of the ARV on transthoracic echocardiogram. 由于主动脉压力负荷增加使右室壁变厚，经胸超声心动图显示出右心室壁位移.
- The hypertension creates a greater pressure load on the heart to induce the hypertrophy. 高血压引起心脏的压力负荷增大，从而导致心肌肥大。
- The siphonage style forms vacuum by under-water pump adding water shooting device or vacuum pump, discharging sludge by liquid pressure difference. 虹吸式采用液 下泵加水射器或真空泵来形成真空，利用液位差排泥；
- It is important to design the loading path correctly during the tube hydroforming process. 确定合理的加载路径是管件液压成形工艺设计的关键。
- The effects of stressing rate,holding time and loading path on ratcheting were discussed in the paper. 揭示了材料在不同加载速率、不同保持时间以及不同加载路径下的棘轮变形特性。
- Results With increase of the volume load and pressure load in the atrium,the atrial septal thick... 结果心房的容量负荷和压力负荷增加时,房间隔的厚度增加、运动速度增快或减慢。
- The second class liquid pressure manometer is used as the standard unit.The method of calibrating the aneriod pressure manometer and the method of data processing are introduced. 以二等液体压力计做标准器,介绍数字式无汞气压计的检定及其检定数据的处理方法。
- Holds external libraries that the application depends on. Also includes the plug-ins subdirectory. This directory is in the load path. 包含应用程序依赖的第三方库，也包含子目录的插件。这个目录在导入路径中。
- Objective: To investigate the association between the left ventricular hypertrophy (LVH) and blood pressure load (BPL) and circadian rhythm in hypertensive patients. 目的:探讨高血压病患者左心室肥厚(LVH)与血压负荷及血压昼夜节律的关系。
- The key to numerical simulation of stretch bending of extrusions is determination of loading path of the clamped ends of extrusion. 型材拉弯成形有限元模拟关键在于型材夹持端运动轨迹的合理描述。
- Based on the experiment, we describe the multilevel pipe pressure loading method that can simulate the high back pressure of pump and has low noise property. 摘要在试验研究的基础上，论述了多级节流增压模拟水泵实际运行背压的低噪声特性。
- Abstract: The second class liquid pressure manometer is used as the standard unit.The method of calibrating the aneriod pressure manometer and the method of data processing are introduced. 文摘:以二等液体压力计做标准器,介绍数字式无汞气压计的检定及其检定数据的处理方法。
