您要查找的是不是：
- Mean Time Between Data Loss 发生数据丢失的事件间的平均时间。平均无故障工作时间
- A GO reliability analysis of a YAG laser system was used to determine the mean time between failures and other important system reliability data. 该文应用GO法分析YAG激光器系统的可靠性，得到系统平均无故障工作时间等重要可靠性指标。
- Mean time between failures (MTTF) of one million hours. 如果什么时候高端存储也开始大规模使用 SSD。
- Mean time to data loss is similar to MTBF for disks and tapes, but is likely to differ in RAID arrays, where redundancy can protect against data loss due to component failures. 对于磁盘和磁带设备来说，平均数据丢失时间的概念与MTBF相似，但是对于RAID阵列来说，平均数据丢失时间可能与MTBF不同，这是因为在RAID中，冗余性能够保护组件故障条件下数据丢失情况的发生。
- Provide reliability calculations;Mean Time Between Failure (MTBF) rates. 提供可靠性计算，平均间隔时间衰竭（ MTBF值）速率。
- Specifically, you should consider the mean time between failures (MTBF) of each device in the critical path. 具体地说,应考虑关键路径中每个设备的平均故障间隔时间(MTBF)。
- The mean time between onset of prolapsed hemorrhoids and hospital admission was 34.4 hours. 内痔脱垂开始到住院平均时间为34.;4小时。
- The individual parameter for evaluating overhauled motor vehicles are: mean time to first failure(MTTF),mean time between failures(MTBF),equivalent failure rate(D),ect. 可靠性单项指标的确定 :平均首次故障里程 (MTTF) ,平均故障间隔里程 (MTBF) ,当量故障率 (D) ;
- Output Data Clock-The AD9410 provides an output data clock synchronous with the output data, simplifying the timing between data and other logic. 输出数据时钟--AD9410提供一个与输出数据同步的输出数据时钟,可简化数据与其它逻辑之间的时序。
- That means standardized equipment and software with a long 'Mean Time Between Failures' and short 'Mean Time To Repair'. 这意味着标准化的设备和软件具备长的“平均无故障时间”和短的“平均维修时间”。
- MTBFU mean time between failures (of a unit) (机组的)平均无故障可用小时
- MTBM Mean Time Between Maintenance 平均维修间隔时间
- MTBM Mean Time Between Malfunction 平均误动作间隔时间
- MTBO Mean Time Between Overhauls 平均检修间隔时间
- This data loss will occur the next time the user logs off. 在下次用户注销时将发生此数据丢失。
- This data loss will occur the next time you log off. 在下次您注销时将发生此数据丢失。
- MTBSE Mean Time Between Software Errors 平均软件错误间隔时间
- Log shipping does not guarantee against data loss. 日志传送不保证不丢失数据。
- MTBSF Mean Time Between Service Failures 平均业务故障间隔时间
- This section lists this kind of data loss errors. 此节列出这类数据丢失错误。
