您要查找的是不是：
- Microwave circuit CAD 微波电路CAD
- CAD program of microwave circuit 微波电路计算机辅助设计软件
- According to the design structure of circuit CAD software, data are putted into the routing program by text file and are stored in data chain. 根据电路CAD软件设计结构的要求，对自动布线的输入数据采用文本文件的输入方式和链表的存储格式。
- Larson, Lawrence E., “RF and Microwave Circuit Design for Wireless Communications ” , Artech House, Boston, MA, 1996. 林仁政、翁芳标著，“无线通讯系统”，全华科技图书股份有限公司，台北市，民国86年。
- Rohde, Microwave circuit design using linear and nonlinear techniques, New York, Wiley, 1990. 袁帝文，王岳华，谢孟翰，王弘毅，高频通讯电路设计，高立图书，民国89年。
- This paper describes the structure and design principles of a pulse Gunn diode, a microwave circuit and a pulse modulator. 文章描述了脉冲耿氏管、微波电路和脉冲调制器的结构和设计原则;
- G.D. Vendelin, A.M. Pavio, U.L. Rohde, Microwave Circuit Design Using Linear and Nonlinear Techniques, John Wiley &Sons, Inc.,1990. 原著:本城和彦,编译:吕学士,书名:微波通讯半导体电路,,出版社:全华科技图书股份有限公司
- G.D. Vendelin、A.M. Pavio、U.L. Rohde、Microwave Circuit Design Using Linear and Nonlinear Techniques、John Wiley &Sons、Inc.,1990. 书名:微波通讯半导体电路,原著:本城和彦,编译:吕学士,出版社:全华科技图书股份有限公司
- DGS can change the effective permittivity of material and distributed capacitor and distributed inductance by etching the defected pattern on the ground of microwave circuit. DGS是通过在微波电路的接地板上蚀刻出蚀刻图案(defected pattern),以改变电路衬底材料的有效介电常数,从而改变介质上的微带线的分布电容和分布电感。
- Based on model analysis, simulation has been done on periodic and nonperiodic DGS structure, their frequency characteristic and their applications in microwave circuit have been presented. 在模型研究基础上,对周期与非周期性的DGS结构进行了仿真分析,相应给出了它们的频率特性及其在微波电路中的应用。
- Low temperature co-fired ceramics (LTCC) becomes an important packaging and interconnecting technology for realizing microwave circuit and system's miniaturization and higher density. 摘要低温共烧陶瓷(LTCC)技术是实现微波电路与系统小型化、高密度的重要组装和互连技术。
- TECHNIQUE DEVICE CIRCUIT CAD TECHNOLOGY IN MICROELECTRONIC FIELD 微电子领域工艺、器件、电路、CAD技术
- Most microwave circuits can be regarded as a two-port network or several inner-connected two-port networks in analysis and computation. 由于大多数微波电路可以用一个二端口网络或者多个二端口网络相互连接的方法进行分析和计算，所以，基于二端口网络的微波电路噪声测量、计算、分析并提取噪声模型参数，在微波工程尤其是低噪声放大器设计中有很重要的应用价值。
- The full nonlinear analysis method is a new method for the microwave circuits under mul-titone excitation based on the spectral balance algorithm. 一、引言 随着线性变换矩阵技术的提出,谐波平衡法的应用领城扩展到棍级器电路的分析中(大信号、小信号分析法)。
- Microwave circuits with strip line structure have a number of characteristics that distinguish them from other circuits. 微波带状线结构电路具有不同于其它电路结构的很多特点，使它们得到广泛的应用。
- The experiment embeds both design and research.Its objective is to train the students to design and research on the microwave circuits by advanced means. 该实验属于设计研究性课程，目标是训练学生完成一个采用先进科研手段进行微波电路设计研究的全过程。
- The study provides one methodological design on multi-band planar metamaterials, to be applied in antenna substrate and noise suppression in microwave circuits. 该研究提供了一种多带的平面型异向性结构的设计思想，在天线基板和微波电路噪声抑制中具有广泛的应用。
- "Push-in type" Expert System Application in the Accumulator and Its Circuit CAD "嵌入式"专家系统在蓄能器及其回路CAD中的应用
- Microstrip transmission line baluns with the characteristics of wide band are studied, which are analysized and designed by using the optimization theory of microwave circuits. 对具有宽频带特性的微带传输线巴伦进行了研究，并应用微波网络优化理论对其进行了详细的理论分析与设计，数值计算结果与有关文献一致。
- RF and Microwave Circuit Design Cookbook 射频与微波电路设计手册
