您要查找的是不是：
- Morphology of fracture surface 断口形貌
- However, for AISI 316, hydrogen barely changed the fracture surface morphology of notch specimen in comparison with that in air. 然而，对AISI 316而言，和在空气中测试的试片比较起来，氢气几乎没有改变凹槽试片的破断面形态。
- The results shows that the micro-void, smooth characterless region, peeling patterns and rocky patterns are basic elements of fracture surface morphology. 结果表明:微坑形貌,平坦无特征区,剥离花样和岩石层状形貌是PS拉伸断面上的基本形貌。前二者对应PS银纹缓慢破裂;
- EFFECTS OF MOONEY VISCOSITY OF EPDM ON MORPHOLOGY OF FRACTURED SURFACE AND IMPACT PROPERTY OF PP/EPDM BLENDS EPDM粘度对PP/EPDM共混物断口形态和冲击性能的影响
- The adiabatic heating induces the temperature of fracture surface layer to be higher than the liquidus temperature too. 计算表明;断口表面层绝热升温温度依然高于液相线温度.
- The micro-structure of fracture surface of HAZ is of granular bainite, with characteristics of coarse crystal zone. 热影响区断口表层剖面组织为粒状贝氏体，显示出粗晶区的特征。
- Fuzzy uncertainty texture spectrum (FUTS) is applied for the pattern recognition of fracture surface morphologies. 应用不确定性纹理谱进行金属断口形貌的识别;
- Interfaces between fibre and matrix in carbon fibre reinforced PEK-C composites and morphology of fracture interfaces of the composites are studied with SEM and ESCA techniques in this paper. 本文用SEM和ESCA技术研究了碳纤维增强PEK-C复合材料中纤维和基体间的界面及其复合材料的断裂界面形态.
- The characterless zone on the fracture is the shear band instead of fracture surface of shear crack. 断口上的无特征区是剪切带，而不是剪切裂纹断口；
- The observations of fracture surface under SEM found that fatigue cracks initiation area exists mostly in surface and in subsurface. 扫描电子显微镜分析发现,疲劳裂纹源的位置主要呈现为表层和次表层两种情况。
- This paper focuses on the effect of adding expanded ammonium nitrate on the combustion and mechanics of nitramine propellant, as well as the morphology of impact fractured surface obtained by SEM. 该文研究了添加膨化硝酸铵（EAN）对硝胺发射药的燃速性能及力学性能的影响，使用SEM手段观察了断口试样的微观形态。
- The fracture of bodies with defects is the course of energy dissipation.The energy dissipation has direct relationship with the irregularity of fracture surface. 摘要含缺陷物体的断裂是一个能量耗散的过程，而这种能量耗散与断裂表面的不规则性有着直接的关系。
- The feature of the fracture surface was examined by SEM and three kinds of fracture mechanisms were determined as follows; 1. quasi-shear fracture; 2. dimple fracture, and 3. quasi-cleavege. 通过扫描电镜对断口进行分析,确定了三种基本断裂机制:(1)准切变,(2)韧窝;
- The results showed that there are three kinds of fracture facets on the fracture surface:annealing twin boundary fracture facet,intergranular fracture facet and transgranular fracture facet. 结果表明:低温脆断断口上有退火孪晶界断面、沿晶断面及穿晶断面3种断裂刻面。
- A study on pollen morphology of the genus Vitis L. 葡萄属植物花粉形态的研究。
- Spore morphology of Chinese ferns. 中国蕨类植物孢子形态。
- Study on the Morphology of Acer Linn. 槭树科槭属植物形态学研究
- STUDIES ON POLLEN MORPHOLOGY OF ADONIS L. 侧金盏花属(Adonis L.;)植物花粉形态研究
- The morphologies of impact fractured surface of HDPE/PET blends during the reaction processing in a twin screw extrudex were studied by SEM. 通过扫描电镜照片（SEM）研究了HDPE／PET共混体系在双螺杆反应挤出过程中，共混合金冲击断面的形态特征。
- Pollen morphology of the genus Kadsura from China. 中国南五味子属植物花粉形态的研究.
