您要查找的是不是：
- Ni matrix composite coating 镍基复合镀层
- Strengthening Mechanism of Particle Reinforced Metal Matrix Composite Coating by Laser Cladding 激光熔覆颗粒增强金属基复合材料涂层强化机制
- The Study of Erosion Behavior of Heat-resistant and Anti-erosion Silicone matrix Composite Coating 耐温耐磨有机硅基复合涂料的冲蚀磨损研究
- The Erosive Wear Behavior of Particle Reinforced Silicone Matrix Composite Coating 颗粒增强有机硅基复合涂层的冲蚀磨损行为
- Technical Optimization and Property Research on Intermetallic Matrix Composite Coating by High Velocity Arc Spraying 高速电弧喷涂复合材料涂层工艺优化与性能研究
- Microstructure and Microhardness of Laser Cladding Nickel Alloy- Matrix Composite Coating Reinforced with Micro Nano Tungsten Carbide 激光熔覆微-纳米碳化钨复合涂层结构与性能研究
- Keywords erosive wear;particle reinforced silicone matrix composite coating （SMCC）;microcrack;micro ploughing;micro cutting; 冲蚀磨损;颗粒增强有机硅基复合材料涂层（SMCC）;裂纹;微观犁耕;微观切削;
- Therma fatigue behaviors of Ni base alloy chromium carbide composite coating made by a vacuum fusion sintering method are discussed in this paper. 研究了用真空熔烧法制得的镍基合金-碳化铬复合涂层的热疲劳行为。
- The wear test of Ni based alloy-Cr/WC composite coating without lubrication is carried on a MM-200 pin-on disc wear tester and study wear-resisting property. 在MM-200型销盘式磨擦磨损实验机上,对Ni基Cr/WC复合涂层进行了无润滑的干磨擦磨损试验,研究其磨损特性。
- Abstract： Therma fatigue behaviors of Ni base alloy-chromium carbide composite coating m ad e by a vacuum fusion sintering method are discussed in this paper. 摘 要： 研究了用真空熔烧法制得的镍基合金-碳化铬复合涂层的热疲劳行为。
- metal matrix composite coating 金属基复合涂层
- Whisker reinforced metal matrix composites. 晶须增强金属基复合材料。
- The metal matrix composite (MMC) is a new material with high properties. 金属陶瓷复合材料是一种新兴的高性能材料。
- Under the same heating rate, the crystallization temperature of Ni P UFD composite coating is lower than that of Ni P coating, while the peak temperature of the two electroless coating are well matched. 在相同的加热速率下 ,Ni P UFD复合镀层晶化的起始温度均低于Ni P镀层 ,但峰值温度与Ni P镀层相当 ;
- Wear Resistance of Laser Clad TiC Reinforced FeAl Intermetallic Matrix Composite Coatings 激光熔覆TiC增强FeAl金属间化合物基复合材料涂层磨损性研究
- Fabrication and processing of metal matrix composites. 金属基复合材料制备加工。
- Ceramic whisker reinforced ceramic matrix composites. 将陶瓷晶须弥散在陶瓷基体内,起增强改善材料性能的复合材料。
- Microstructure and Dry Sliding Wear Resistance of Induction Cladding In-situ Formed TiC Particle Reinforced Metal Matrix Composite Coatings 感应熔覆原位合成TiC增强金属基复合涂层组织与抗磨性能的研究
- Ni base alloy/WC composite coating 镍基合金／WC复合涂层
- The fracture of SiC p/Fe metal matrix composite (MMC) was studied using SEM fractographig and EDS technologies. 应用SEM和EDS等分析技术对SiCp/Fe金属基复合材料的断口形貌进行了研究。
