您要查找的是不是：
- Thermal expansion coefficient prediction of ceramic particle reinforced Ni base alloy coating 椭球形陶瓷颗粒增强镍基合金复合涂层热膨胀系数预报
- Therma fatigue behaviors of Ni base alloy chromium carbide composite coating made by a vacuum fusion sintering method are discussed in this paper. 研究了用真空熔烧法制得的镍基合金-碳化铬复合涂层的热疲劳行为。
- The high-temperature plasma entered through the breach and melted the supporting materials such as Al alloy and Fe,Ni base alloy, which result in the space shuttle Colum... 对于航空、航天与核动力领域中广泛采用的通用关键材料,应该加强其制备工艺的研究,特别是可视化铸造技术的研究。
- Wear Resistance and Erosion Resistance of Vacuum Melting Ni Based Self-flux Alloy Coatings 真空熔烧Ni基合金覆层的耐磨性和抗冲蚀性能
- Effect of Nb on Age hardening Curves of Ni base Alloy Nb对镍基合金时效硬化曲线的影响
- Study on structure and micro-texture of Ni based alloy of directional casting 定向铸造Ni基合金的组织及取向的研究
- Research on the Ni Based Alloy Cladding on Al Surface by Laser and Its Tribological Characteristics 铝合金表面激光熔覆Ni基合金及其摩擦学特性研究
- Thermal Expansion Coefficient Prediction for Ni Base Alloy Ceramic Composite Coating 颗粒增强镍基合金热膨胀系数预报
- Keywords self lubrication material Ni base alloy sosoloid sulfide microstructure phase structure; 自润滑材料;镍基合金;固溶体;硫化物;显微组织;相结构;
- Ni based alloy Ni基合金
- Ni base alloy 镍基合金
- Ni base alloy DZ4 DZ4镍基合金
- Ni base alloy GH4169 GH4169镍基合金
- The influences of heat treatment on structure micro hardness, static corrosion resistance in normal temperature and hot solution corrosion resistance of electroless Ni P and Ni Co P alloy coatings were studied. 研究了热处理对化学沉积Ni－P、Ni－Co－P合金镀层的组织结构、显微硬度、常温静态腐蚀性能和热溶液腐蚀性能的影响。
- Hard Facing is weld deposited Cobalt base alloy. 硬面焊接钴基合金沉淀物。
- The chemical compositions,physical performance,mechanical performance,corrosion performance of high Cr Ni base hastelloy G 30 alloy were studied,and its performance was analysed with application. 评述了高铬镍基哈氏合金G?30的化学成分、力学性能、耐蚀性能及冷热加工性能，并结合使用情况分析了它的应用前景。
- The amorphous Fe Cr alloy coatings were obtained by controlling the composition of bath operation conditions. 本实验通过控制镀液组成和操作条件获得了非晶态铁-铬合金镀层。
- Ni-based and Co-based alloy coatings were made on the Q235 steel substrate by oxy-acetylene flame spraying and fusing. 采用氧乙炔火焰喷熔法在Q235钢表面制备了镍基和钴基合金涂层。
- Co-Ni alloy coatings were electrodeposited from a sulfate plating bath and sulfate plating bath containing sodium citrate. 分别在硫酸盐镀液和添加柠檬酸钠的硫酸盐镀液中电沉积钴-镍合金。
- The surface appearance and corrosion products of Zn-Mg alloy coatings with different content of Mg were analyzed by SEM and XRD. 采用扫描电镜和X射线粉末衍射,对含镁量不同的热镀锌镁合金镀层表面形貌和腐蚀产物进行了分析。
