您要查找的是不是：
- The total flight dynamic numerical simulation programs and the control program of the CSSP system are designed. 设计了完整的飞机外挂物投放 /发射过程的飞行动力学数值仿真程序及CSSP系统的总控程序；
- A numerical simulation program is developed to calculate the steam condensation rates in CMT, and the simulation results are in good agreement with data obtained through experiment. 借助数值模拟方法，初步预测了不同工况下CMT中各时刻闪蒸蒸汽的凝结率，并与试验结果进行了比较。
- Numerical simulation program 数值模拟软件
- Numerical Simulation of Rotor Flow in Hover. 悬停下旋翼流的数值模拟。
- Numerical Simulation of High Turbulence Air-Water Two-Phase Flow. 高紊动气液两相流的数值模拟。
- At the same time this paper explicated how to write the program in detail. how to experiment by using numerical simulation step by step. 在本文中具体地说明了编制计算机程序的方法和数值试验的步骤。
- The numerical simulation result agreed with this analysis. 模拟结果证明了分析的正确性。
- Numerical simulation of ice-structure interactions by DDA method. 基于DDA方法的冰-结构动力相互作用的数值模拟。
- Numerical simulation of particle motion laws in cy-clones. 旋风分离器内颗粒运动规律的数值模拟
- Also,the numerical simulation result for DPE method is given. 对分布压电单元法作了数值仿真计算
- To evolve a simulation program, it is usually most convenient to draw up a flow chart. 搞一个模拟程序，通常最好是先画出一个流程图。
- Theoretical results are illustrated by numerical simulation. 数值结果验证了上述结论的正确性。
- Generation production costs and their present worth may be computed using a production simulation program. 发电的生产成本和目前的产值可用生产模拟程序计算。
- The numerical simulation was also carried out by FDM/FEM method. 结果表明,凝固开始后,铸件对砂芯的压缩力逐渐增长,且增大的速度较快;
- The simulation program is written with C++ language based on platform mode and debugged with Watcom C++. 仿真程序用C ++语言编写 ,在Windows 98环境下用WatcomC ++环境进行调试。
- It is best studied using numerical simulations. 最好的办法是用数值模拟。
- BPSK This is a simulation program that can be given Channel SNR calculation BPSK system error probability. 这是一个BPSK仿真程序，可以在给定信道信噪比下计算BPSK系统的差错概率。
- Simulation program was compiled,and it was applyed to typical following condition and cut-in condition . 编制了模拟仿真程序,并应用程序对典型的跟随工况和切入工况进行了模拟仿真。
- A simulation program,which includes 4 subprograms inside its unit calculation module,is developed. 程序由4个主要模块组成。
- The finite element program ABAQUS was applied to study the numerical simulation of failure process of steel frame-RC corewall hybrid structure. 摘要利用ABAQUS通用有限元程序对钢框架-钢筋混凝土核心筒混合结构的破坏过程进行了数值模拟。
