您要查找的是不是：
- Pinion Preload Shims–Typical 小齿轮预荷－典型的
- PINION PRELOAD SHIMS 小齿轮预荷垫片
- PINION PRELOAD SPACER 小齿轮预荷隔环
- There is something wrong with this pinion; it doesn't move. 这个小齿轮有问题，不转了。
- Remove the depth shims from rear pinion bearing cup bore in axle housinRecord the thickness of the depth shims. 从轴管里的后小齿轮轴承盖孔拆卸限深垫片。记录限深垫片厚度。
- Adjust bearing clearance with shims. 用垫片调整轴承间隙。
- If an oil slinger is used behind the inner pinion bearing cone, deduct the thickness of the slinger from the dial indicator reading and use that total for shim selection. 如果抛油环用在内侧驱动小齿轮内圈的后面，从针盘指示表读数中扣除抛油环的厚度，垫片的选择用这个总数。
- The extra shims are just replacement shims. （一个小时就是30度的意思）。
- What way are you going to preload? 打算如何压载?
- Allow preload all accounts during startup? 启动时预加载帐户文件?
- By analyzing the push force to pinion gear bearing, the impact of the push force to bearing on the preload of pinion assembly of truck is confirmed. 介绍了中空装配式凸轮轴的滚花连接机理,采用有限元数值模拟分析了滚花连接压装力的影响因素,并进行了凸轮和轴体的压装试验。
- Shim Hye-Jin is a veteran actress in Korea. 沈惠珍是韩国知名女演员。
- Refer to Drive Pinion Bearing Pre-Load Adjustment. 参阅驱动小齿轮轴承预荷调整。
- Put the preload water into the tank. 向压载舱灌压压载水。
- SHANGHAI NONG SHIM FOODS CO., LTD. 上海农心食品有限公司。
- Worn teeth on ring gear or drive pinion gear. 环形齿轮或驱动小齿轮上齿磨损。
- Rotate the pinion yoke three or four times. 旋转小齿轮轴轭三次或四次。
- Nick's boss always pays shim late. 尼克的老闆总是迟发薪水。
- Remove pinion gears from differential case. 从差速箱处拆卸主动齿轮。
- Some 0.060" to 0.010" spring steel or shim steel. 有些0.;060“到0
