您要查找的是不是：
- Unplug the power mirror wire harness connector. 拔去电动视镜线束接头。
- POWER MIRROR HARNESS CONNECTOR 电动视镜电线束接头
- Pull the power mirror switch away from the trim panel far enough to access the wire harness connector. 从装饰板拉电动视镜开关足够远，找到线束接头。
- If equipped, disconnect mirror harness wire connector. 如果配备，断开镜子线束接头。
- Disengage power mirror connector from trim panel. 从饰板上拆开电动视镜接头。
- Disconnect the power mirror wire harness retainers from the inner door panel. 从内侧车门饰板断开电动视镜电线束扣件。
- Disconnect the power mirror wire harness retainers from the inner door panel . 从内侧车门饰板断开电动视镜电线束扣件。
- Unplug the wire harness connector from the switch. 从开关拔出线束接头。
- Disconnect retractor wire harness connector. 断开皮带卷收器线束接头。
- Connect the wire harness connector to the module. 连接线束至模组。
- Unplug the brake lamp switch wire harness connector. 拔出刹车灯电线束接头。
- Disconnect all fuel injection harness connections. 断开所有的燃油喷射电线束接头。
- Unplug the push button module wire harness connector from the trip computer, compass, and thermometer display module. 从行车电脑，罗盘，和温度表显示模组上拆下按压按钮模组线束接头。
- Position switch into license plate lamp housing and connect switch harness connector. 定位开关到牌照灯壳，连接开关线束接头。
- Lower the speaker from the headliner far enough to access and unplug the speaker wire harness connector. 把扬声器从车顶衬向下降低一段能够达到的足够长的距离，拔出扬声器电线束接头。
- This is the console located behind the shift lever that is where window switches, power mirror controls and areas where you can install items of your own into. 这是控制台后面的转向杠杆，是窗口的开关，功率控制和镜子的地方就可以安装你自己的项目进入。
- Unplug the wire harness connector from the low pressure cycling clutch switch on the top of the accumulator. 从蓄压器顶部的低压循环离合器开关上拔下线束接头。
- Plug the in-vehicle temperature sensor wire harness connector into the instrument panel wire harness. 插车内温度感知器线束接头进仪表板线束接头。
- Pull the switch out from the mounting hole in the door opening far enough to access the wire harness connector. 从车门洞里的固定孔中将开关拉出足够远，以便能处理线束接头。
- Disconnect the vacuum harness connector from the back of the heater-A/C mode control switch on the control panel. 从控制仪表板上的空调暖气模式控制开关上断开真空线束接头。
