您要查找的是不是：
- Microstructure and properties of the pre hardened plastic mould steels ASSAB718 and GC718 for large section mould were compared and studied. 对大截面预硬型塑料模具钢ASSAB718和国产GC718钢进行了对比性研究。
- In this paper,the machinability of prehardened plastic mould steels ASSAB718 and GC718 were compared and studied. A software package called Thermo Calc was used for analyzing the non metallic inclusions in the steels. 对预硬型塑料模具钢ASSAB718和国产的GC718的切削加工性能进行了对比性研究 ,并结合Thermo Calc软件对钢中非金属夹杂物进行了分析。
- wCr17Mo Type Plastic Mould Steel Cr17Mo型塑料模具钢
- Keywords polishing;cavity;nonmetal inclusion;plastic mould steel; 抛光;孔洞;非金属夹杂物;塑料模具钢;
- Compound Interrupted Water Quenching Techniques of Large Plastic Mould Steel Block 塑料模具钢大模块的水冷复合间隙淬火技术
- Numerical Simulation of Heat Treatment for Large Section Die Blocks Made of Plastic Mould Steel 大断面塑料模具钢块热处理的数值模拟
- Keywords nonmetallic inclusions;surface defect;plastic mould steel;mirror polishing; 非金属夹杂;表面缺陷;塑料模具钢;镜面抛光;
- Suzhou Lekai Plastic Mould Co., Ltd. 苏州乐开塑胶模具有限公司。
- Usual used plastic mould in want polish property. 一般用途特别是要求抛光的塑胶料模具。
- The plastic mould can produce plastic mould. 我公司可定做能够生产塑料网片的模具。
- The plastic mould can produce the Plastic Net. 我公司可以定做能够生产塑料网片的模具。
- The Plastic mould can produce Plastic Net. 我公司可以定做能够生产各种塑料网片的模具。
- Plastic Mould Steels 塑料模具钢
- PRECIPITATED PHASE IN UNQUENCHED AND UNTEMPERED DIE STEEL FOR PLASTIC MOULD? 非调质塑料模具钢中析出相的研究?
- The Selection of Plastics Mould Steel for Pressing Moulding 压制成型塑料模具钢的选择
- plastic mould steel 塑料模具钢
- large plastic mould steel 大型塑料模具钢
- prehardened plastic mould steel 预硬型塑料模具钢
- Wing Chit Plastic Mould Factory was established in 1986, with an area of 30,000 ft2. 永捷塑料制模厂于1986年成立，现厂房面积为30,000平方尺，员工130人。
