您要查找的是不是：
- Single screw element 单螺杆元件
- An exergy method was used to study usage efficiency of single screw compressor's shaft power in the fuel cell vehicle. 摘要运用（火用）方法对车载燃料电池系统单螺杆压缩机压缩过程中的轴功利用效率以及耗散方式进行研究。
- FTX polygon is a new type of screw element which is invented to meet the higher speed and efficiency development in co-rotating twin-screw extruder. 六棱柱元件是为适应同向双螺杆挤出机高速高效的发展要求而出现的一种新型混炼元件。
- The maleation of ABS by using a single screw extruder and dicumyl peroxide as initiator was studied. 以过氧化二异丙苯为引发剂，采用单螺杆挤出方法实现了ABS树脂接枝马来酸酐。
- The single screw extruder is an important component in extrusion of polyolefin production. 单螺杆挤出机是一个重要的组成在挤压聚烯烃生产。
- We supply any types of air-cooling and water-cooling single screw air compressor, gratulate to choose and buy! 我们供应各种型号的风冷式、水冷式单螺杆压缩机，欢迎客户选购！
- The processing equipments of FEP masterbatch are single screw extruder and double screw extruder. FEP色母粒的加工设备有单螺杆挤出机和双螺杆挤出机两种。
- PP and PA6 were blended and extruded with a single screw extruder, PA6 could fibrillated in the matrix. 以聚丙烯为基体、尼龙6为分散相共混得到分散相成纤的原位复合材料。
- The structure and the performance of the single screw extruder of electromagnetism dynamic are presented. 简要介绍了电磁动态单螺杆挤出机的结构性能,分析了螺杆在振动力场作用下的轴向受力状况。
- Using three-dimensional particle trajectories dispersed droplet diameter at the outlet of screw element during compounding in a co-rotating intermeshing twin-screw extruder was computed. 摘要用物料三维流动路径结合分散模型计算了螺纹元件出口处分散相液滴的直径，分析了螺杆转速、挤出机产量和液滴初始直径对末端分散相液滴直径的影响。
- The mixing facilities have experienced the following steps: Roll mixer,Banbury mixer,Single screw extruder,Twin screw extruder and Twin rotor continuous mixer. 混炼设备的发展经历了下列几个主要阶段:开炼机、密炼机、单(双)螺杆挤出机和双转子连续混炼机。
- NI-MPE (Non-Intermeshing Multi-Process Element) and intermeshing left- handed screw element with shallow grooves were designed according to geometry of fully wiped twin-screw equipment. 非啮合多过程元件(Non-Intermeshing Multi-Process Element)及其螺杆组合的出现是为了能在一台装有熔体齿轮泵的啮合同向双螺杆挤出机上一次完成无机填料与聚合物的混合、挤出和成型。
- Rheological properties of HDPE/montmorillonite( MMT) nano-composite and HOPE were measured using a slit die rheometer attached to an industrial-scale single screw extruder. 采用两种不同口模厚度的窄缝流变仪研究了高密度聚乙烯(HDPE)/蒙脱土(MMT)纳米复合材料及其基体HDPE的流变性能。
- In this paper, the formulation and processing technology for CPVC thermal conductivity pipe produced by single screw extruder were investigated. 本文研究了适用于单螺杆挤出的氯化聚氯乙烯(CPVC)导热管的配方和工艺条件。
- The novel structure is different from the overseas equitments as it is the creationary design based on the commen single screw extruder. 该新型结构不同于国外的已有设备，没有改变螺杆的构型，是在现有普通单螺杆挤出机结构的基础上进行的创造性设计。
- The oil-filled EPDM,PP and super-fine talc powder were used as main materials, and EPDM/PP-TPV was prepared in single screw extruders by means of dynamic vulcanization. 以充油三元乙丙橡胶 (EPDM )、粉状聚丙烯 (PP)、超细活性滑石粉为基本材料 ,采用动态硫化法在单螺杆挤出机组上制备EPDM/PP共混型热塑性弹性体 (TPV) ;
- Sandard screw elements:complete intermeshing and high-efficient self-cleaning performance. 标准螺杆元件：全啮齿、高自洁性能。
- The theological behavior study of the extruded rigid PVC structural foamplastics(RPVC-SF)was carried out with"capillary die"fitted on Theconventional single screw extruder. 本文详细论述了使用直接装在普通单螺杆挤出机上的“毛细管”机头研究硬PVC 结构泡沫塑料(RPVC-SF)挤出过程中流变行为的全过程。
- This article introduces a new type reciprocating single screw extruder for the continuous production of glass fiber reinforced thermosetting phenolic moulding compound. 本文介绍了应用于热固性酚醛增强模塑料的连续化生产新工艺中的往复式单螺杆混炼挤出机。
- Influences of conveying phenomena, combination of screw elements, processing conditions and die on quality of the extrudate are analyzed. 讨论了物料在螺杆中的输送特征、螺杆元件组合、生产工艺条件及模具结构等对产品质量的影响。
