您要查找的是不是:
- Its subject coverage includes: sol gel coatings. 它的主题涉及的范围包括:螺线管胶凝体涂层。
- The preparation of WO 3 thin films has been reported using a sol gel process together with the dip coating method, and tungsten powder being the raw material. 以金属 W粉为无机原料 ,溶胶 -凝胶技术结合浸渍镀膜方法制备出 WO3 薄膜 ,借助 SEM、可见光分光光度计、椭偏仪等仪器测量了薄膜的特性。
- Concrete is a compound material made from sand, gravel and cement. 混凝土是沙、碎石和水泥的混合物。
- BST thin films sol gel technique epitaxial growth electrical properties. 标 签 薄膜 溶胶-凝胶工艺 外延生长 电性能.
- The inorganic whisker is a special one in the High-tech new compound material. 无机晶须材料是高技术复合材料中的一种特殊成员,
- The new compound material can increase the coating's resistance to acid. 新的化合材料可增加涂层的抗酸性。
- C.J.Brinker, W.Scherer, Sol Gel Science The Physics and Chemistry of Sol Gel Processing (San Diego, 1990). 郑舜宇,“以溶胶-凝胶法合成高分子基氧化矽复合材料之研究”,国立中山大学材料科学研究所硕士论文,民国90年。
- Conclusion It demonstrated that metronidazole gel compound could cure periodontal diseases reliably, and the method of treatment was convenient and the cost was low. 结论复方甲硝唑凝胶治疗牙周病疗效确切,同时治疗方法简便、费用低廉,显示出广阔的应用前景。
- NANTONG GAOXIN CERAMAL COMPOUND MATERIALS CO., LTD. 南通高欣金属陶瓷复合材料有限公司。
- The ultra fine WO 3 powder was prepared by colloidal chemistry method, sol gel and polymerized complex method. 通过胶溶法、溶胶凝胶法、聚合络合法合成了超细三氧化钨粉体。
- Sol gel hepatitis B surface antibody (HBsAb)/Au unmarked immunosensor is presented for the detection of hepatitis B surface antigen (HBsAg). 采用溶胶 凝胶 (sol gel)技术包埋乙肝表面抗体 (HBsAb) ,涂布于金盘电极表面 ,构成sol gel HBsAb/Au非标记免疫传感器 ,用于检测人血清中乙肝表面抗原 (HBsAg)。
- The sol gel technique and dip withdrawal method have been employed to produce amorphous CuO SiO 2 thin film with high porosity. 利用溶胶凝胶工艺和浸渍提拉法制备了非晶态CuOSiO2多孔薄膜湿敏元件;研究了它们的感湿特性.
- The ferrite ultrafine particle catalysts which contain Zn,Ni and Co were prepared by sol gel method and characterized by DTA TG,IR,XRD and BET methods. 采用溶胶 凝胶法制备了含Zn、Ni、Co的铁酸盐超微粒子催化剂 ,运用DTA TG、IR、XRD以及BET比表面测试等手段对所制备的样品进行了表征。
- The burnish machine is used for surface treatment before the cold rolling for compound material, and hence is one of the key installations for compound material production. 摘要冷连轧复合材料打磨机用于复合材料冷连轧前的表面处理,是钢基复合冷连轧材料生产的关键设备之一。
- Investigated the film of TiO 2 on granular activated carbon(TiO 2/GAC) prepared from tetrabutyl titanate through the sol gel method. 研究了溶胶 -凝胶法制备以颗粒活性炭为载体的 Ti O2 膜 (Ti O2 /GAC) .
- Organic - inorganic nanometer compound material have concurrently characteristic of inorganic - organic matter. 有机-无机纳米复合材料兼有无机和有机物的特点。
- Pure and Pt doped ( m( Pt ):m( WO 3)=0.3%) WO 3 thin films were prepared using the sol gel process by the dip coating technique on alumina substrates. 用溶胶凝胶浸渍技术在三氧化二铝基片上制备了纯和 (m(Pt) :m(WO3 ) =0 .;3%25 )铂搀杂的三氧化钨膜
- There was a strengthening peak in the Graphite/PUE compound material with 10% graphite particles. 石墨质量分数为10%25时,复合材料的强度出现峰值;
- The primary ultrafine carbon powders were prepared by sol gel supercritical fluid drying method using different raw materials. 采用不同的原料,利用溶胶-凝胶超临界流体干燥法制得了超细炭原粉。
- A new method of preparation of cellular polycarbonate/carbon compound material is introduced. 介绍了一种新颖的制备聚碳酸酯/炭黑复合材料的方法。