您要查找的是不是:
- Most methods were adopted to research the steel flow pattern, inclusion trajectories and fluid flow field with and without flow control devices. 中间包实验采用数理模拟的研究方法对各种控流装置条件下中间包内钢液的流动模式、夹杂物模式以及流场等方面进行研究。
- The results indicate that steel flow field in the tundish with this structure is reasonable, which can avoid the slag involing in steel liquid to flow into mol... 可避免钢渣卷入钢液流向水口进入结晶器,也有利于钢液内的夹杂上浮排除。
- Based on the columm coordinate program of axisymmetry three dimension turbulent flow field,a program of nonaxisymmetry three dimension turbulent flow field which is applied to simulate molten steel flow in ladle is developed. 在对称的圆柱坐标三维湍流流动场程序的基础上,开发了非轴对称圆柱坐标三维湍流流动程序,并用该程序模拟计算了rh 真空精炼过程中钢包内钢液的流动过程
- The effect of different operation parameters on the molten steel flow in the mould in No.2 Steelmaking Plant, WISCO has been studied via the three-dimensional flow field software developed by the authors. 利用开发的三维流场计算软件,研究了操作参数对武钢二炼钢板坯连铸机结晶器内钢液流动的影响。
- Effects of Wall Thickness of SEN on Liquid Steel Flow Field and Temperature Field in Mould SEN壁厚对结晶器内钢液流场和温度场的影响
- The teeming time and height affect flow field too. 并分析了流体注入时间、注入高度对流场的影响。
- Steel Flow Field 钢水流场
- liquid steel flow field 钢液流场
- Error: gui-monitor-residuals: Uninitialized flow field. 直译就是流场没有初始化!!!!重新初始化。
- Fluid pressure signal validates result of flow field computation. 液体压力信号验证流场建模与计算的结果。
- The research was made on the afterbody flow field of civil aircraft. 本文运用计算与实验相结合的研究方法对民机机身后体流场进行了研究。
- The position of the bottom blown nozzles will influence the flow field d... 在吹气量一定的情况下,底吹喷嘴位置对流场有较大影响。
- A video will be presented showing how steel flow in a thin slab caster with a tapered mold is influenced and calmed down when using the EMBR. 本文用一段录像显示一个带有一定锥度的薄板坯连铸结晶器内的钢液流动在使用了电磁制动后是如何受到影响并逐渐减弱的。
- The typical seepage flow field of the bottom for the spillway dam is obtai... 最后计算了典型的坝基渗流流场,计算结果与实验结果吻合较好。
- Experimental Study on Image Preprocessing of Thermal Flow Field Tomogram[J]. 引用该论文 姚卫;闫大鹏;王振东;尤海航;贺安之.
- The multiple versions of EMS in the continuous casting of flat products are reviewed and classified with respect to liquid steel flow pattern and metallurgical results. 回顾了电磁搅拌应用于扁平产品连铸生产中的各种形式,并按液态钢水流动形态和冶金效果给予分类。
- A casting blank solidification model was presented in which both thermal transference and liquid steel flow dynamics in the solidifying blank were considered. 为了克服仅仅以铸坯热平衡为基础进行建模的不足,针对传热、钢水流动和凝固三种现象,建立起铸坯凝固过程的数学模型。
- Finally, experiments are performed to testify the flow field simulation results of FTX polygon. 最后本文对六棱柱元件的流场模拟计算结果进行了实验验证。
- This curvature of the flow field alters the pressure distribution and the aerodynamic forces from their values in translational flight. 流场的弯曲使压力分布和空气动力与直线飞行时的值相比发生了变化。
- The flow field inside an oil-gas separator are simulated with Discret Phase Model(DPM). 用DPM模型对油气分离器内的气液两相流流场进行了数值模拟。