您要查找的是不是：
- Taekified preforms 增黏预制件
- Condensate will leavemarks on the preform surface. 露水会遗留痕迹在瓶坯的表面上。
- Condensate will leave marks on the preform surface. 露水会遗留痕迹在瓶坯的表面上。
- Its comprehensive coverage focuses on ceramic preforms. 它的广泛报导集中在陶瓷的粗加工成品。
- Precise preform loading system in order to minimize failure rate. 高可靠性的进坯、上坯、出坯系统、使吹瓶机故障率降到最低。
- Mass Edit Mode allows you to preform mass deletion of posts. 默认情况下，评论表格显示最近二十篇文章。
- Major in PET preform mould,cap mould and blow mould. 专业生产瓶坯模具;瓶盖模具和吹瓶模具.
- The tackified fiber preform technology is important in LCM process. 纤维预成型技术是LCM工艺的一个重要环节。
- In the first stage, preforms are made using an injection moulding machine. 第一步用注塑机注出瓶坯。
- Min. 2-3 years sales experience in preform injection machines is preferred. 至少有2-3年的销售经验,在瓶胚注塑机方面有销售经验的优先考虑。
- There will be a sprue at the bottom of the preform of no more than 5 mm. 瓶坯底会留有不超过5mm长的水口
- Most preform moulds are rectangular and are longer than they are wide. 大多数的瓶坯模具呈长形，就是长度比阔度大。
- Cooling time dominates cycle time in thick-wall moulding like preform moulding. 属厚壁注塑的瓶坯，冷却时间支配着周期时间。
- Two methods used to liquid impregnate carbon fiber preform are introduced. 介绍了液相浸渍炭纤维坯体的两种方法。
- But they also reported that not all green roofs preform perform equally well. 但是他们也报告了不是所有的绿色屋顶都做得同样的好。
- In 2001, TFO started the manufacturing of single mode fibre preform. 2001年TFO光棒项目顺利投产，成为中国第二家光纤预制棒生产商。
- In the one-stage process, when the preforms cool to about 110oC, the stretch and blow moulding process begins. 一步法是在瓶坯注塑后冷却到约110℃时做拉吹动作。
- Injection moulding of bottle caps is distinctly different from that of preforms in that it is thin-wall moulding. 与瓶坯注塑截然不同，瓶盖的注塑是薄壁注塑。
- The efficiency of making preforms, which belong to the thick-wall domain, is highly dependent on cooling time. 属厚壁注塑的瓶坯注塑生产效率受冷却时间支配。
- High quality preforms are important for discontinuously reinforced composites made by the pressure infiltration method. 摘要采用压力浸渗方法制备非连续增强复合材料需要高质量的预制块。
