您要查找的是不是：
- Osaka A,Ohtsuki C,Iida H, et al. Bioactivity of H2O2-Treated Ti and Ti alloys[J]. Fifth world Biomaterials congress.Canada,l996,557-62. 宋应亮;徐君伍;马轩祥;等.;不同氧化温度处理下钛75合金耐孔蚀的研究[J]
- The Present Status of Ti and Ti Alloys in Dentistry 钛及钛合金在牙科领域中的研究现状
- The surface properties of Ti and Ti alloys can be significantly improved by laser surface modifications such as laser surface alloying(LSA), pulsed laser deposition(PLD), laser cl. 通过激光表面改性处理,如激光表面合金化(LSA)、脉冲激光沉积(PLD)及激光表面熔敷陶瓷涂层等可以显著改善钛及钛合金的表面性能。
- The microstructure, properties and impact fracture toughness of welded joints of Ti and Ti alloy by using tungsten-argon arc welding were studied. 研究了钛及钛合金经钨极氩弧焊焊接接头的显微组织、力学性能和冲击断裂特征。
- Ti and Ti alloys 钛及钛合金
- The quantitative relation between the mechanical properties of the reinforced bar containing V and Ti and the chem-ical composition is determined. 确定了含微量钒钛钢筋的力学性能与化学成分的定量关系；
- This type of material includes Al alloy and Al-based composite, and recently the HSRS of Mg_based composite and Ti alloy is investigated. 高应变速率超塑材料主要是铝基复合材料及铝合金，最近，对镁基复合材料、钛合金高应变速率超塑性能的研究也已开始。
- Application of Cast Titanium and Ti Alloys in Dentistry 钛和钛合金铸件在牙科医疗上的应用
- Have a high speed rating TI and TI or and the Internet backbone connection, to get a relatively high productivity and reliability, and even to be able to transport a few hundred megabytes of data. 拥有了低速TI或者分级TI以及与因特网的骨干网不断接之后，不离可以得回相差矮的工息效果和可靠性，甚至不妨传输几百兆字节数据。
- The coarser TiS and Ti 4C 2S 2 have little adverse effect on the deep drawability, so that the steel has excellent properties for deep drawing. 粗大的 Ti S、Ti4C2 S2析出相 ,既使钢板具有良好的涂搪性能 ,又对钢的深冲性能无有害影响 ,因此 ,IF钢搪瓷板具有很好的涂搪性能和深冲性能
- It is unnecessary to rip the bandage off and ti withers automately. 而今不需撕下绷带，它却自然而然地消退。
- Pure Ti and New Ti Alloy for Surgical Implant Application 外科植入物用纯钛及其合金
- Typically, TE devices are used at lower temperatures than TI and TPV systems. 通常情况下，热电设备的使用温度比热及热光伏系统低。
- Cr or Cr - Ti alloy was used in vacuum evaporation. 以金属铬和铬钛合金进行真空蒸镀。
- Surface hardening technique is one of the effective means to enhance the surface properties of P/M Ti alloys. 表面强化技术是提高粉末钛合金表面性能的有效手段之一。
- The new method has been applied to fractal dimension determination of the fractures of alloys Ti3Al and Ti 24Al 11Nb with STM at nanometer scale. 用扫描隧道显微镜（STM）利用变分辨率码尺方法在纳米尺度测定了Ti3AlTi?24Al?11Nb合金断口的分形维数。
- This study was conducted to examiune the fibrotic effect of Ni Ti and 317L alloys in esophagus. The extract fluid from Ni Ti,317L alloys was made according to the ASTM standards of U.S.A. 为探讨新型支架材料 Ni- Ti、317L合金在食管局部的致纤维化作用 ,按美国 ASTM标准制备 Ni Ti、317L合金的金属浸提液 ;
- Effect of yttrium on the microstructure and properties of IMI829 and Ti 14Al 21Nb alloys were studied by using optical microscope, SEM and mechanical property testing device. 采用光学显微镜、扫描电镜和力学性能测试设备，研究了在IMI829和Ti?14Al?21Nb合金中添加Y，对合金显微组织和性能的影响。
- In the thesis, wollastonite coatings are deposited onto Ti alloys by plasma spraying.The process, structures and properties of wollastonite coating are examined. 本论文采用等离子喷涂技术，将硅灰石陶瓷沉积于钛合金基体表面，制备了硅灰石涂层，对涂层的工艺、结构和性能作了研究。
- With the known imputing torsional moment Ti and horse power Hi of the gear. 与已知塑料轮的输入力矩Ti和马力Hi比较。
