您要查找的是不是：
- Trapezoidal thread gauges 梯形螺纹量规
- The common thread gauges including ring gauges and plug gauges are used to calibrate thread workpieces with GB and ISO standards. 普通螺纹量规（螺纹环规、螺纹塞规）适用于检测符合国家标准及国际标准的螺纹制件。
- Under the condition of deflective load, the maximum stress on the root near the slot of the trapezoidal thread of the tie bar decreased 11.6%. 在偏载作用下，拉杆梯形螺纹牙根在卸载槽处的最大应力降低11.;6%25；
- The common thread gauges including ring gauges and plug gauges are used to calibrate thread work pieces with GB and ISO standards. 普通螺纹量规(螺纹环规、螺纹塞规)适用于检测符合国家标准及国际标准的螺纹制件。
- Due to the trapezoid thread's complicated machining,parameter programming can be used to compile its machining program to a subprogram. 针对梯形螺纹加工较繁琐的特点,利用参数编程,将梯形螺纹的加工程序编写成相应的子程序。
- A related parameter can be given in the main program,and then call the subprogram like a fixed cycle to finish the trapezoid thread's machining program. 这样就可以像固定循环一样,在主程序中给定相应的参数,然后调用子程序,就可完成相应的梯形螺纹加工程序的编写。
- For making fine turning and trapezoid threading turning tools. 制造精车刀和螺纹车刀。
- Via a trapezoidal thread operated by hand, advance free from play is allowed for.Car body support is monitored in the rear position via limit switches, in order to release the clearance gauge. 本人是搞技术的,英语一般,希望得到各位高手的指教,下面句子是什么意思,本人不胜感激!
- Special thread gauges for gas cylinders 气瓶专用螺纹量规
- American Standard Taper Pipe Thread Gauges 美制圆锥管螺纹量规
- NC High Speed Turning of Trapezoidal Thread 数控高速车削梯形螺纹的方法
- Design of trapezoidal thread roller 梯形螺纹滚丝轮的设计
- trapezoidal thread processing difficulties 梯形螺纹加工难点
- trapezoidal thread broaching tap 梯形螺纹拉削丝锥
- Multifunctional Master Gauge for Oil Casing Thread Gauges 石油套管螺纹多功能量具校验仪
- aNSI standard thread gauges are made in accordance with aNSI/aSME B1.2. 美标统一螺纹量规符合美国联邦标准ansi/aSMEB1.;2
- Fasteners exceeding these torques may be liable for rejection provided both mating parts meet their respective thread gauging specifications prior to the application of the sealer. 如果公母紧固件都应符合各自的螺规检验条件要优先适用于密封技术条件，则超过这些力矩值的紧固件应该拒收。
- Processing the trapezoidal thread by transfering the subroutine finely 巧妙调用子程序加工梯形螺纹
- It may take an hour to wind off all the thread. 把所有线都松下需一个小时。
- Keywords numerical control lathe;subroutine;processing;trapezoidal thread; 数控车床;子程序;加工;梯形螺纹;
