您要查找的是不是:
- ltrafine/nanophase WC - Co cemented carbide 超细/纳米硬质合金
- Through the experiment in which diamond films are prepared on WC TiC Co cemented carbides by means of Cu/Ti combination interlayer, the effects of deposition conditions on the quality, surface roughness and adhesion of prepared diamond films are studied. 通过采用Cu/Ti复合过渡层在WC TiC Co硬质合金基体上制备金刚石薄膜的试验 ,研究了沉积工艺对金刚石薄膜的质量、表面粗糙度及附着力的影响。
- The cemented carbide comprised of Carbide(WC)and Bonding (Co or Ni)in traditonal concept.This hardmetal has series of perfect properties. 传统概念上的硬质合金是由难熔金属碳化钨(WC)为硬质相,金属钴(Co)或镍(NI)为粘结相的烧结合金材料。
- Laser Heat Treatment of WC Co Hardmetal[J]. 引用该论文 朱祖昌;王维荣.
- The type of heat damage for WC cemented carbide was melting and dissolve of carbide,diffusion and reaction of element. 硬质合金烧损形式主要有颗粒边缘熔化、溶解烧损、合金元素的扩散和反应烧损。
- The influence factors of nanometer WC cemented carbide powder produced by mechanical alloying are also reviewed. 论述了用机械合金化技术制备纳米WC硬质合金粉的影响因素。
- In 1958, Ganzhou Concentration Plant was established and started its production. After 1963, tungstic acid, APT, W powder, WC powder and cemented carbide could be produced too. 1958年,赣州精选厂建成投产。1963年以后,进一步发展到生产钨酸、钨酸钠、仲钨酸铵、钨粉、碳化钨粉、硬质合金等。
- Zhuzhou Cemented Carbide Group Corp. Ltd. 株洲硬质合金集团有限公司。
- Zhuzhou Cemented Carbide Works USA Inc,. 株洲硬质合金进出口公司。
- YUEQING CEMENTED CARBIDE PRODUCTS CO., LTD. 乐清市硬质合金制品有限公司。
- For nonmagnetic cemented carbide dies. 适于制造无磁硬质合金模具。
- CHENGDU JUNSHENG CEMENTED CARBIDE TOOL CO.LTD. 成都骏升硬质合金工具有限公司。
- BEIFANG CEMENTED CARBIDE TOOL CO., LTD. 南宫市北方硬质合金工具有限责任公司。
- ZHEJIANG HONGFENG CEMENTED CARBIDE CO., LTD. 浙江鸿峰硬质合金有限公司。
- ZHUZHOU CEMENTED CARBIDE CUTTING TOOLS CO., LTD. 株洲钻石切削刀具股份有限公司。
- The WC based cemented carbide with high hardness, high strength, strong wear resistantance, has been widely used as a very important tool material. 摘要WC合金具有高硬度、高强度、高耐磨性、强抗腐蚀性等一系列优点,作为一种不可缺少的工具材料已经得到了广泛的应用。
- The technique of processing of cemented carbide scrapes is analysed, and the processing of Co(<8%) cemented carbide scrapes by electrochemical method is studied in the experiment. 对电溶法处理废硬质合金的原理进行了分析,对电溶法处理钴含量低于8%25的废硬质合金进行了工艺研究。
- Special parts for cemented carbide multi-stage progressive dies. 专用于高速连续级进模具的硬质合金凸凹模配件。
- ZHEJIANG DEWEI CEMENTED CARBIDE MANUFACTURING CO., LTD. 浙江德威硬质合金制造有限公司。
- MIM of cemented carbide adaptor of bayonet have been investigated. 研究了硬质合金刺刀座注射成形工艺过程。