您要查找的是不是：
- Unlike dc machines, induction machines have uniform air gap. 和直流电动机不同，感应电动机具有均匀的气隙。
- air gap induction 气隙磁感应
- Design of Air Gap Inductance Regulation Arc Suppression Coil Control System 气隙调感式消弧线圈控制系统的设计
- What's the air gap to start preloading? 平台升离水面多少才开始压载？
- A control system of bearingless induction motor based on torque winding air gap field oriented vector control is accomplished. 实现了一种基于转矩绕组气隙磁场定向控制的无轴承异步电机控制系统。
- Calculation and Structural Design for Air Gap Inductance Regulation Arc-Suppression Coil 气隙调感式消弧线圈结构设计及计算
- The installation of an air gap and drain line are recommended. 建议安装气隙和排放管道。
- Remove L shape bracket from one side of air gap drain. 从气隙排放装置的一侧拆卸L型支架。
- Hang the Air Gap Drain on the body of the relief valve (Fig. 2). 将气隙排放装置悬挂在安全阀阀体上（图2）。
- This would create an air gap to eliminate any possible backflow. 这将产生一个气隙以消除任何可能的回流。
- air gap inductance 气隙电感线圈
- Air gap intensity of magnetic induction 气隙磁感应强度
- A physical air gap must be maintained between the discharge pipe and the drain or sump. 必须在排放管道和排水沟或污水坑之间配置一个硬件气隙。
- The discharge should be funneled through a Watts air gap fitting piped to a floor drain. 排放应该成漏斗状通过美国瓦茨气隙连接件管道引到地漏上。
- An air gap provides the unobstructed, physical separation between the discharge end of a potable water supply line and an open receiving vessel. 在饮用水供应系统的排放末端和开敞的接受容器之间，气隙提供不被堵塞的硬件分离。
- The assembly shall also include two resilient seated isolation valves, four top-mounted resilient seated test cocks and an air gap drain fitting. 这种总成应该包括两个弹性阀座隔离阀，四个顶部安装弹性阀座测试旋塞和一个气隙排放接头。
- Reinstall the elbow into the base of the relief valve to hold the Air Gap Drain in place. 将弯头安装在安全阀的底座,将气隙排放装置固定住。
- NOTE: The installation of a drain line is recommended. When installing a drain line, an air gap is necessary. 注意:建议安装排泄管道。安装排泄管道时,有必要安装一个气隙。
- Also, mechanical backflow preventers and air gaps can be bypassed. 此外，机械式防回流阀和气隙可以作为旁路。
- The installation of a drain line is recommended. When installing a drain line, an air gap is necessary. 建议安装排泄管道。当安装排泄管道时,需要配置气隙。
