您要查找的是不是：
- The results show oil production rate speedes, after injecting air as a certain amount, with the air injection rate increases, but the total recovery is accordant. 研究表明注入一定量的空气后，随着空气注入速度增加，产油速度加快，但是最终的原油采收率基本一致。
- air injection rate 注气速度
- The txRate parameter is the injection rate. txRate参数就是注入速率。
- Effect of polymer injection rate on EOR. 注聚合物速度对提高原油采收率的影响
- Results Injection rate had a significant effect on TTP of lung. 结果 注射速率对两肺组织至峰值时间有显著性影响。
- The influence of air injection on the performance of compressor is analyzed by altering the mass flow rate, injection angle, yaw angle and collocation of injectors. 本文采用数值模拟方法研究了进口叶尖喷气对低速离心压气机稳定工作范围的影响。
- Now air injection into light oil for EOR has received more attention. 目前注空气提高轻质原油采收率受到广泛的关注。
- The scan cover, injection rate and reconstruction matrix were assured. 确定增强扫描范围、佳注射速率与重建矩阵。
- Air injected into the powder path to atomise it into a pattern. 按照粉末路径到喷涂成型（工件）之间喷射的空气。
- The wax appearance temperature rose after air injection and fell when the temperature of air injection rose. 注空气后比注空气前石蜡沉积点高；注空气温度增加，石蜡沉积点降低；
- They varied both chamber pressure and mixture ratio, making use of a stepfunction change in the oxidizer injection rate. 他们通过用氧化剂喷射速率阶跃函数变化的方法来改变气室压力和混合比。
- To meet the high coal injection rate it is necessary to modernize PCI technology. 为了适应高炉大量喷吹煤粉，必须对高炉喷煤工艺及设备进行改造。 方向是：煤场要增加储煤能力，实现自动配煤；
- Moreover, the principle and evaluation method of LTO process are discussed, and the developing trend of air injection is forecasted. 此外，还论述了注空气低温氧化技术的原理、评价方法等方面的内容，预测了该技术的发展趋势。
- The impact of injection rate of polymer flooding on the inaccessible pore volume is studied by the numerical method. 利用数值模拟方法，研究聚合物驱注入速度对不可及孔隙体积的影响。
- As advancing of technical progress, air injection LTO process will be an inevitable trend of gas flooding both in China and the world. 随着技术进步，注空气低温氧化技术是我国乃至全世界注气提高采收率技术发展的必然趋势。
- The oil production could be enhanced by increasing injection rate if the formation and equipment conditions enabled. 在地层条件和设备允许的情况下，增加注入速度有利于提高油井产量。
- Experimental studies of turbulent combustion were conducted in a test facility for swirl combustor with staged air injection. 本文在分级进风旋流燃烧室的实验装置上进行了湍流燃烧的实验研究。
- This paper presents a predictive research on the performance of D.I.diesel engine from its fuel injection rate. 从直喷式柴油机喷油规律出发对其整机性能进行了预测研究。
- As advancing of technical progress, air injection LTO process will be an inevitable trend of gas flooding both in China a... 此外,还论述了注空气低温氧化技术的原理、评价方法等方面的内容,预测了该技术的发展趋势。
- The injection weight,injection rate and plasticizing capacity change according to the model and kind of the material. 射出量,注射率及塑化能量依材料类别及模型而改变。
