您要查找的是不是：
- alternating load test 反复负荷试验,交替荷载试验
- View the details of a previous load test. 查看前一个负载测试的详细信息。
- Change some of the load test settings. 更改一些负载测试设置。
- First you must open a load test for editing. 首先,您必须打开一个负载测试以进行编辑。
- Double-click the load test you selected. 双击所选的负载测试。
- How to: Add Scenarios to a Load Test. 向负载测试添加一个方案。
- Class that represents the current load test. 此命名空间包含表示当前负载测试的。
- You can also create load test plug-ins. 也可以创建负载测试插件。
- This plug-in is specified in the load test editor. 此插件在负载测试编辑器中指定。
- A load test can have more than one scenario. 一个负载测试可以有多个方案。
- The load test of main generator. 主发电机负载试验。
- The crack appears at the edge angle due to stress concentration caused by alternating load,which finally leads to the fissuring of die plate. 凹模在使用过程中,由于交变载荷的作用,使碳化物的棱角处应力集中出现裂纹,最终导致凹模开裂。
- Load tests are created with the Load Test Wizard. 负载测试通过“负载测试向导”创建。
- Zoom in is only available in the Load Test Analyzer. 放大功能只在负载测试分析器中可用。
- In the Load Test Editor, click the Load Pattern for the scenario. 在“负载测试编辑器”中,对于方案单击“负载模式”。
- In odontoid chain drive, the chain bears a periodical alternating load, in which the impact load produced while the link meshes into the tooth of sprocket makes comparatively big effect. 摘要在齿形链传动中，链条承受周期性的交变载荷，其中链节啮入轮齿时产生的冲击载荷影响较大。
- To switch to graph view, click Graphs on the load test toolbar. 要切换到图形视图,请单击负载测试工具栏上的“图形”。
- To switch to table view, click Tables on the load test toolbar. 要切换到表视图,请单击负载测试工具栏上的“表”。
- Loading test of accommodation ladder(pilot ladder). 舷梯（引水员梯）压重试验。
- Load spectrum determination of tubing inwall proves the tubing is acted by the axial alternating load in a rod-pumped well, and all the fractures are located at the root of the tooth. 油管内壁载荷谱测定进一步明确了油管在工作状态下承受轴向拉-拉交变载荷，其断裂部位全部在应力集中的齿根处。
