该词条未找到_海词词典

您要查找的是不是：

aluminum casting ingot 铝铸锭
Single sided aluminum cast piece. 单一片面铝铸造件.
On the base of the optimization result,the quality of casting ingot is fine and the remelting efficiency is high. 按该工艺参数,所获铸锭内外质量好,重熔效率高。
Types of companies interested to meet: foundries for aluminum casting, turnkey assembly companies. 欲交流的公司类型:铝铸造厂;交钥匙工程的安装公司。
Its cast ingot was made into some samples by hotrolling, colddrawing and recrystallization annealing. 铸锭经过热轧开坯、冷拉拨及再结晶退火等工序,制取各种试样。
The searching situation of 4-Hi speed continuous caster made by Davy Co for producing thin gauge aluminum casting coil is introduced. 着重介绍英国Davy四重薄带高速铸轧机的特点和研制状况。
The composition design,melting process theory and defect control on cast ingot of Aluminium standard sample were described in this paper. 阐述了铝块状光谱标样的成分设计、标样熔炼工艺理论及铝标样铸锭缺陷的控制。
The paper mainly analyzes the macrostructure of rails rolled with CC billets, which is compared with that of rails rolled with cast ingot. 本文主要对包钢连铸坯轧制钢轨低倍组织结构作了初步的讨论分析，并与模铸锭轧制钢轨低倍组织结构进行了比较。
A new non-cyanide zinking process for high-Si aluminum cast has been studied in this paper. 研究了一种无氰的高硅铝铸件的浸锌新工艺。
The physical properties of aluminium alloy 6082 cast ingot at high temperature, heat process for hot rolling, hot rolling schedule and side rolling process were researched. 研究了6082铝合金铸态高温性能，热轧过程的加热制度，热轧道次压下量和滚边工艺，确定了热轧工艺参数。
The factors that affect the porosity in transversally cast ingot are related,porosity is very detrimental to the mechanical properties and surface quality of sheet. 介绍了在横向连续铸造工艺中产生气体缺陷的主要原因；阐述了气体缺陷对板材产品质量的影响；
Suitable for lifting and transporting cast ingot, steel ball, pig iron, mechanical chip, various kinds of steel scraps, return scraps, cropping, baling scraps and etc. 用于吸吊铸铁锭、钢球、生铁块、机加切屑；铸造厂的各种杂铁、回炉料、切料头；打包废钢等。
Abstract: The high pressure blast furnace gas and coke-oven gas mixture used for making red copper casting,bronze casting, aluminum casting, zinc base alloy and some brass casting, is introduced. 文摘:介绍了用高炉、焦炉混合高压煤气作为燃料，生产紫铜件、锡青铜件、铸铝件、锌基合金及部分黄铜件。
The high pressure blast furnace gas and coke-oven gas mixture used for making red copper casting,bronze casting, aluminum casting, zinc base alloy and some brass casting, is introduced. 介绍了用高炉、焦炉混合高压煤气作为燃料，生产紫铜件、锡青铜件、铸铝件、锌基合金及部分黄铜件。
Influence of pressure applied on the mold after pouring on the surface status and mechanical properties of aluminum castings in lost foam casting is investigated. 试验研究了浇注后型腔压力对消失模铸造的铝件表面状态、力学性能影响的趋势。
Derusting, oxide skin removing and surface hardening for copper castings, sheet metal, stainless steel strips, aluminum castings. 铜合金铸件,薄板、不锈钢带、铝合金铸件除锈、除氧化皮及表面强化。
The tube and dewcap are painted, the machined metal parts are hard anodized, and the tube rings are satin-finished aluminum castings. 全镜金属制作并作氧化镀层,而且镜桶是整体一次完成的铝铸件，运行极其精密顺化。
Improvement of the Aluminum Cinder Scraper on the Automatic Continuous Producing Line of Casting Ingot 铝铸锭线上扒渣机的改进
Development of Cast Ingot of Pb-Ca Alloy 铸造铅钙合金锭的开发
Etching and hardening for small-sized castings andforgings, heat treatedparts, aluminum castings, steel pipes, motorcycle components, steel plates and steel strips. 小型铸锻件、热处理零件、铝合金铸件、钢管、摩托车零件、钢板、带钢的除锈、刻蚀及强化处理。