您要查找的是不是：
- Secondly it is necessary to define the applied load. 其次，需要确定所作用的载荷。
- From select menu apply load selection. 点击选择-载入选区。
- At zero applied load, the crack is closed along the perimeter of the specimen but open in the center. 在施加零载荷处，试样周边的裂纹是闭合的，而中心则是张开的。
- Elastic recovery means that when the applied load is released, the piece returns to its original shape. 弹性回复是指当样品所受应力撤销后,其完全回复到初始形状的现象。
- When the applied load is increased, the curve of COF is steady, and the value of COF is steady and less trending. 施加负荷渐渐增加后，平均摩擦系数值会趋近稳定，其曲线平稳且其值较小；
- When the applied load is increased continuing, the curve of COF is liner, and the value of COF is less trending. 而当施加负荷在持续增加，平均摩擦系数则会开始渐渐变大，其曲线呈线性。
- The indenter, which has a finite elastic modulus, also undergoes elastic deformation under the applied load . 压头也具有一定的弹性模数，所以在加载的时候它自身也要承受弹性变形。
- Analyses of dynamic crack propagation and crack arrest for a specified initial flaw size, external geometry, and applied load can be conducted in either of two different ways. 为特定的初始裂纹尺寸、外部几何形状和应用载荷对动态裂纹扩展和裂停止进行分析，可以用两种不同方法中的任何一种来进行。
- Plastic deformation takes place first at the crack tip and spreads across the solid as the applied load is increased beyond general yielding. 塑性变形首先发现在裂纹顶端，当工作载荷超过了普通屈服时，则传播到物体中。
- The external forces include reactions (R)as well as applied loads(P). 外力包括反力R和施加力荷载P。
- To simulate the vulnerable working conditions of APG under the applied load,place the substituted load equal to the wind load and the crowd extrusion load on the prototype of APG. 通过对屏蔽门样机施加等效风压荷载和人群挤压荷载,模拟屏蔽门受荷载作用下的不利工况。
- At the beginning, tests are made on mechanical properties of the plastic material for making the model, the magnitude of applied load sustained and the durability measurement on the material. 开始时,对模型用的塑性材料的机械性能,试验中采用加荷的大小值,以及材料的持久性的测量作了一些试验。
- Decoupling may start at the loading point with the applied load increasing and then propagate towards the far end of the bolt. 耦合区界面剪应力分布与小荷载情况不同,其相关模量参数可采用综合折减系数表示。
- Divergence occurs when a lifting surface deflects under aerodynamic load so as to increase the applied load, or move the load so that the twisting effect on the structure is increased. 蒙皮是构成并保持机翼形状不可缺少的结构元件。
- Nor does it present load to the engine. It does apply load to the generator and limits the capacity of the generator. 无功功率无功功率是指电流在发电机、电动机、变压器等的感应线圈之间往复流动,这也构成了电力负载的一部分。它并没做有用功,而且也不是发动。
- Load-Wear Index An index of the ability of a lubricant to prevent wear under applied loads as determined in the Four-Ball EP Tester. 负荷-磨损指数是衡量润滑油在四球极压试验中所施加的负荷下所表现出的抗磨能力的一项指数。
- The new comer applied his mind to the job. 新来的职员工作专心致志。
- Working with engineers, develops and optimizes part shapes and sections to withstand applied loadings. 和工程师一起工作，发展和优化零件的形状和截面使其能够承受应用负荷。
- Uncertainties in applied loads are introduced into the theory of optimization by use of ellipsoidal convex models. 通过凸壳体模型的应用，加载的不确定性被引入最优化理论。
- Are you using /CAE? If so, please partition your surface and apply loading. 对的，将矩形和圆区分开来，将圆定义为一个块就行了！
