您要查找的是不是：
- Theoretical Analysis of a New Artificial Plastic Hinge at the Frame Beam End 框架梁端新型人工塑性铰理论分析
- The ultimate load of plate girders was analyzed by spline finite strip and plastic hinge method. 摘要用样条有限条塑性铰法分析了板梁的极限荷载。
- It is shown that the secondary moment can facilitate the moment redistribution when the rotational capacity of plastic hinge is not enough. 从理论上证明了预应力次弯矩在塑性铰转动能力不够时能提高连续梁弯矩调幅能力的这一观点。
- The plastic hinge model can also be used for the cantilever tapered castellated beam-columns when the axial compression ratio is below a certain value. 当轴压比较小时，悬臂楔形蜂窝压弯构件可以近似的采用塑性铰模型；当轴压比较大时，利用塑性铰模型分析是不合适的。
- Comparasive Study on Energy Relieving Effect of Using Artificial Plastic Teeth or Ceramic Teeth in Mandibular Implant-supported Overdenture. 全下颌种植覆盖总义齿塑料牙与瓷牙能量缓冲作用的比较分析。
- According to capacity design philosophy, brittle shear failure inside ductile members must be inhibited, to insure adequate rotation capacity of the plastic hinge. 按照能力设计思想,必须防止延性构件内部发生脆性剪切破坏,以确保塑性铰的转动能力。
- Objective: To study the energy relieving effect of using artificial plastic or ceramic teeth in mandibular implant-supported overdenture. 摘要目的：比较分析应用塑料牙与瓷牙对全下颌种植覆盖总义齿及其支持组织的能量缓冲作用。
- The loci of plastic hinge line and the maximum load during first roof weighting are determined by using kinematical method, and the minimum span of roof key stratum is derived. 利用机动法确定了老顶岩板初次来压时载荷的上限值和塑铰线的位置,得到了顶板岩体关键层的最小破断跨距。
- The Ion of plastic hinge line and the maximum load during first roof weighting are determined by using kinematical method, and the minimum span of roof key stratum is derived. 利用机动法确定了老顶岩板初次来压时载荷的上限值和塑铰线的位置，得到了顶板岩体关键层的最小破断跨距。
- Objective Discuss the influence of different adrenine concentration on hemorrhage of the surface of awound and curatine effect with artificial plastic palate or not and the removing time. 目的探讨不同浓度肾上腺素对出血的影响与腭裂修复术后未加腭护板及加用腭护板不同拆除时间的疗效。
- So, it takes both advantages of spline finite strip method with less node displacement and that of plastic hinge method with convince of getting plastic elemental stiffness matrix. 因此该方法兼具二者优点：样条有限条法的位移量少和塑性铰法形成塑性刚度矩阵的便利。
- Arrangement of the plastic Hinge in the Frame Construction Beam 框架结构梁中塑性铰的设置
- RESEARCH OF PLASTIC HINGE OF REINFORCED CONCRETE BENDING STRUCTURE 钢筋混凝土受弯构件塑性铰的试验研究
- This dress is made of artificial fibers. 这件衣服是人造纤维的。
- Her artificial gaiety disguised an inner sadness. 她以矫揉造作的快乐掩饰著内心的悲痛。
- Based on this, the collapse mechanism of a structure is that the occurrence of plastic hinges lead to the reduction of the degree of the statical indeterminancy of the structure. 在此基础上，本文认为结构破坏的机制是由于塑性铰的产生导致结构的超静定次数减少最终成为崩塌机构。
- After the inelastic phase, the distributing of plastic hinges is proper and reasonable, and the requirement of ductility design of structure is satisfied. 进入塑性阶段后，塑性铰分布合理，满足了结构延性设计的要求。
- I can't stand his artificial smiles. 我受不了他的假笑。
- I was fitted an artificial tooth by the dentist. 牙医给我镶了颗假牙。
- The plastic hinges in the column end leaded to limit rupture of frame structure, and they were important characteristics of beam-hinge failure mechanism on frame structures. 摘要柱端塑性铰是框架结构梁铰破坏机制的一个重要特征。钢管混凝土框架结构极限破坏是由柱端塑性铰导致的。
