您要查找的是不是:
- The material quality is ASTM A743M (ZG00Cr13Ni4Mo) the austenite stainless steel. 材质均为ASTM A743M(ZG00Cr13Ni4Mo)奥氏体不锈钢。 由于其一,它们的形状所致,在加工制造中给工件的装夹和翻身带来很大的难度。
- The strengthening effects of C and V on high strength austenite stainless steel welds were studied. 研究了元素C、V对高强度奥氏体不锈钢焊缝金属的强化作用。
- The corrosion behavior of austenite stainless steel weld joint in the different acidic medium was studied. 研究了奥氏体不锈钢焊接接头在不同酸性介质中的腐蚀行为。
- SUS304HC austenite stainless steel with more Sn cracks in the course of blooming mostly. 锡含量高的SUS304HC含铜奥氏体不锈钢初轧开坯时容易出现开裂现象。
- This paper analyzes the influences of carbon,silicon and aluminium on the surface reaction when sintering austenite stainless steel powder. 研究了碳、硅和铝合金元素对水雾化奥氏体不锈钢粉末烧结时的表面反应的影响。
- The twin roll casted austenite stainless steel strip was cold rolled, and the surface quality and the microstructure of the strip was investigated. 摘要对双辊铸轧704不锈钢薄带进行了冷轧处理,分析了冷轧前后薄带的表面质量及显微组织。
- Influences of carbon, silicon and aluminium on the surface reaction of austenite stainless steel powder during sintering have been studied. 研究了碳、硅和铝合金元素对水雾化奥氏体不锈钢粉末烧结时的表面反应的影响。
- The process investigation on hybrid YAG - MAG laser arc welding of austenite stainless steel is systematically developed. 针对奥氏体不锈钢材料,系统地开展了YAG-MAG激光电弧复合焊工艺研究。
- Blades of the two pumps are all austenite stainless steel castings.The blade made by 304 stainless steel fractured just working for four months. 两台泵的叶片均采用了奥氏体不锈钢铸件,其中一台的叶片材料为304不锈钢,使用4个月发生断裂;
- Abstract The microstructure of 316L austenite stainless steel after charging with deuterium and tritium for 6 years at room temperature is studied. 摘要 将长期与氖氮气体作用后的316L不锈钢容器不断充入氩气介质,直至容器破裂。
- The ultrasonic defect echo of a austenite stainless steel with coarse grainswas acqiuired and processed using a developed computerized ultrasonic signal analysissystem. 采用计算机化超声信号分析系统,对奥氏体不锈钢粗晶材料缺陷的超声回波信号进行采集和加工。
- Wetted parts: All Austenitic stainless steel and Stellite 6. 接触液体的部件:奥氏体不锈钢和钨铬钴合金6。
- Bolting: Strain-hardened Austenitic Stainless Steel. 螺栓:应变-硬化奥氏体不锈钢。
- We are specialized in sand castings in the materials of carbon steel,alloy steel,Austenite stainless steel,Martensite stainless steel,Duplex stainless steel and so on,products are widely usrd in General machine,electric power,mining machine and so on . 碳钢、合金钢、奥氏体不锈钢、马氏体不锈钢、双相不锈钢等铸件,产品应用于通用、电力、矿山机械等行业。
- The test of 8 pass cold extrusion of equal channel angular pressing (ECAP) with ratio of extrusion reduction 1.02 of each pass for 00Cr18Ni12 austenite stainless steel has been carried out. 对 0 0Cr18Ni12奥氏体不锈钢进行道次变形量为 1.;0 2的 8道次的等通道冷挤压试验。
- The deformation induced martensite in metastable austenite stainless steels effect their physical and chemical properties. 亚稳奥氏体不锈钢冷变形后产生形变诱发马氏体,影响其物理和化学性能。
- Abstract : The deformation induced martensite in metastable austenite stainless steels effects their physical and chemical properties. 摘要 : 亚稳奥氏体不锈钢冷变形后产生形变诱发马氏体,影响其物理和化学性能。
- These are bolting materials suitable for high temperature service with austenitic stainless steel valve materials. 这些是适用于高温应用环境的奥氏体不锈钢阀门的螺栓材料。
- The surface reaction of water atomized 304L austenitic stainless steel powder during sintering has been studied. 摘要研究了水雾化奥氏体不锈钢粉末在致密时的表面化学反应。
- Austenitic Stainless Steel is a Ni-Cr-Mo stainless steel in the AISI Type 316 category. 在AISI类别316范畴中,奥氏不锈钢是一种镍-铬-钼不锈钢。