您要查找的是不是：
- Average flow rate (AFR) adds from 3.42ml/s to 9.89 ml/s. 平均尿流率(AFR)从3 .;4ml/s增至9
- Bladder capacity, bladder wall thickness, postvoid residual volume, uroflowmetry maximal flow rate, and average flow rate were similar in both groups. 两组膀胱容量、膀胱壁厚度、排空后残馀量、尿流测量最大流量以及平均流量相似。
- When leaching regent NaHCO_3 concentration is 1 (g/L), average flow rate is 0.13 m/d, leaching 96 days with total liquid/solid ratio 9.42, uranium lea-ching rate is 76%. 溶浸剂中NaHCO3质量浓度1g/L,平均流速0 13m/d,浸出96d,总液固体积质量比达9 42L/kg,铀浸出率为76%25。
- The effects were evaluated mainly by urodynamic data including maximum flow rate(MFR), average flow rate(AFR), voiding volume(VV), female urethral syndrome score (FUSS) and quality of life (QOL). 以自由尿流率的主要参数如最大尿流率(MFR)、平均尿流率(AFR)、排尿量(VV)和尿道综合征症状评分(FUSS)、生活质量评分(QOL)为疗效指标观察治疗效果。
- Research of average flow rate and its deviation ratio for drip holes of micropressured and superthin porous-hoses 微压超薄多孔软管滴孔平均流量及偏差率研究
- average flow rate 平均(尿)流率
- Consistent flow rate from nebulizer to nebulizer. 在雾化器间提供持续稳定的流通速率。
- Affect the melt flow rate and the cooling speed. 会影响熔体的流动性和冷却速度。
- The average flow of the river is 200 cubic metres per second. 这条河平均流量为每秒二百立方米。
- Possibility to control the flow rate by Pump. 由蠕动泵调节盐溶流量。
- Typical maximum system flow rate (7.5 feet/sec. 标准最大系统流量为7.;5英尺/秒。
- The HTA flow rate has two-faced influences on them. 热风流量对其影响呈现两面性。
- Most of it went in 90 minutes, at a rate that at its maximum was faster than the average flow of the Niagara Falls. 大部分水是在90分钟里流失的，最大流速比尼亚加拉大瀑布的水流流速还快。
- Either flow rate is insufficient or CPU is overoccupied. 不是流量不够用就是CPU资源占用过多!
- Average urine flow rate (AFR)increased from 1,6ml/s to 4.8ml/s a fter 3months. and 5.2ml/s after 6 months. Conclusions The injury is slight. 平均尿流率(AFR)由1.;6ml/s升至4
- Detection wavelength was 260 nm,flow rate 0.7 mL/min. 检测波长2 6 0nm ; 流速为 0 .;7mL/min。
- How the Catering Enterprises Face a High Employee Flow Rate? 员工流动率高餐饮企业如何面对?
- Effects of various process variables on average flow velocity of LFC liquid aluminum in the mold have been studied. 研究了各工艺因素对消失模铸造铝液在型腔中平均流速的影响。
- Turn on the carrier gas, and establish the proper flow rate. 接通载气，调至合适地流速。
- Decreasing the gas flow rate leads to pressure undershoot. 气量突降时，膨胀波沿程传播。
