您要查找的是不是：
- beam loading coefficient 电子束负载系数
- The results show that the ability of beam load of RFQ accelerator is raised with this method. 初步结果表明：采用这一方法可有效提高RFQ加速装置的载束能力。
- The container crane dynamic load coefficient dynamics model is built and its analytical result by the method of modal analysis is achieved. 摘要建立确定大型岸边集装箱起重机起升动载系数的动力学模型，并用模态分析法求得其解析解。
- The dissertation includes static stress and deformation under different work conditions, using the way of dynamic load coefficient to analyze the dynamic stress and deformation. 针对不同工况，对车架结构做了静态的应力和应变分析，用动载系数法做了动态的应力和应变分析。
- In numerical analysis,the author used the loading coefficient method to apply rock dead load and multiplier standard building load to tunnel caverns and tunnel linings,and then compared the result. 本文针对重庆"骑龙经典"工程下卧重庆某长江大桥南城隧道洞室地基进行定性分析以及二维、三维数值模拟分析。
- L-BS type cantilever beam load cell, with one end fixed, another end loaded, steel ball transfering force, it has a good sealed structure. L-BS型钢制悬臂梁式称重传感器,一端固定、一端加载,钢球传力,并设有良好的密封结构。
- In view of low milling efficiency, the effect of milling form, loading coefficient of materials,rotational speed of ball mill, milling time and grinding aid on milling efficiency was discussed. 针对陶瓷生产中球磨机效率低的问题，从工艺上讨论了研磨方式、物料的装填系数、球磨机转速、研磨时间以及助磨剂对球磨机效率的影响。
- Gao Y Q,Yin L C,Yao J H.Relation betwee motor power factor and load coefficient in oil transfer system with frenquncy variation speed-regulation[J].Natural Gas and Oil,2003,21(4):46-49. [3]曹玉泉;尹丽春;姚建红.;变频调速输油电机功率因数和频率负载率的关系[J]
- Double Ended Shear Beam Load Cells 双剪切梁称重传感器
- Calculation of beam load capacity in modular rack 组合式货架横梁承载的计算
- Steel Plate Reinforced Concrete Beam Load Testing 混凝土粘钢加固梁现场荷载试验
- hoisting dynamic load coefficient 起升动载系数
- The load on that beam is more than it will bear. 那根梁上的载重超过了它所能承受的量。
- She performed on the balance beam with much grace. 她在平衡木上表演得非常优美。
- uprising dynamic load coefficient 起升动载系数
- The beam of the searchlight pierced the darkness. 探照灯的光柱射入黑暗中。
- His answer was right on the beam. 他的答案完全正确。
- According to the original assumption, this theory should be applied only to long, thin beams loaded in pure bending. 根据原来的假定，这个理论只适用于受纯弯曲载荷的长而薄的梁。
- He struck the beam with his head. 他的头撞到梁上了。
- The beam has a thickness of 3 inches. 这根梁厚3英寸。
