您要查找的是不是：
- Single convolution bellows type air spring 单曲囊式空气弹簧
- Double convolution bellows type air spring 双曲囊式空气弹簧
- Three convolution bellows type air spring 三曲囊式空气弹簧
- Performance and Development of Bolsterless Bogie with Big Convolution Bellows Type Air Spring 大曲囊空气弹簧无摇枕转向架的性能及发展
- bellows type air spring 囊式空气弹簧
- Bellows type rubber air spring 曲囊式橡胶空气弹簧
- Study on semi-active control of shipboard convoluted type air spring 船用回转体形空气弹簧半主动控制研究
- Pressure gauges shall generally be bourdon tube or bellows type. 现场压力表应通常是波登管或波纹管型。
- Analysis of Troubles in Pressure Self-Seal Type Air Springs for Passenger Cars 客车压力自密封式空气弹簧故障浅析
- Only valves such as packless diaphragm or bellows type should be used. 只能使用无衬垫膈膜阀或波纹管阀。
- diaphragm type air spring 膜式空气弹簧
- convoluted type air spring 回转体形空气弹簧
- A static finite element model of an air spring was given. 摘要文中建立了空气弹簧的静态有限元模型。
- Press bending joint, flange joint and air spring end plate. 扣压弯曲接头，法兰接头和空气弹簧接头。
- The key factors affecting the stagnation point position of L-type pipeline section are the setting position of bellows type expansion joint and the bend angle degree. 影响水平转角管段驻点位置的主要因素为波纹管补偿器设置位置、弯头角度。
- It is the new type Air Erasable Pen,we believe this new product will i... 产品说明： 传统气消笔、褪色笔的升级产品。
- Pilot operated valves shall be considered for back pressures greater than 40% of set pressure if more favourable de-rating factors result in a valve smaller than a bellows type. 如果更多有利的非测定因子导致阀门小于波纹管类型的，对于背压大于设定压力的40%25的，应考虑辅助操作阀。
- Shaft sealing adopts single (double) face, bellow type mechanical seal, it also can adopt soft packing, is can meet sealing demands of all kinds of conditions. 轴封采用单（双）端面、波纹管等形式的机械密封，也可采用软填料密封，能适应各种条件下的密封要求；
- Described are the fundamental structure and performance of the air spring rising type car-body tilting system of N700 series EMUs for Shinkansen in Japan. 介绍了日本新干线N700系电动车组空气弹簧上升式车体倾摆系统的基本结构和性能。
- The calculation of stagnation point position of straight pipeline section with both movable ends and L-type pipeline section with bend at one end and bellows type expansion joint at other end is discussed. 摘要探讨了两侧为活动端的直管段及一侧活动端为弯头，而另一侧活动端为波纹管补偿器的水平转角管段驻点位置的计算。
