您要查找的是不是：
- The bending stress is zero for the element at B. 在B处的单元体，弯曲应力为零。
- Thus the bending stress is very easily computed. 因此,极容易计算出其弯曲应力。
- The bending stress is zero for the element at B . 在b处的单元体，弯曲应力为零。
- Comparing with traditional gears, under the same load, the optimized teeth would produce smaller bend stress, so as the gears' bend intensity can be improved. 由于优化后齿轮齿形的变化，在同样的载荷条件下轮齿所受的工作弯曲应力减小，可提高齿轮的弯曲强度。
- In this thesis the generation of orthogonal-aligned-shaft Face Gear, Finite Element Analysis(FEA)of the bend stress and contact stress of the FG drive are studied. 本文主要研究了正交面齿轮的齿面生成、正交面齿轮传动的弯曲应力和接触应力的有限元分析。
- The remote bending stress at the plate surface was measured. 板表面处的远场弯曲应力已被测出。
- I have no idea of their having found a better drill bending stress. 我没听说他们找到了能抵抗高弯曲应力的好钻杆。
- The Bending Stress Analysis of Model 81 Double Circular Arc Gears. 81型双圆弧齿轮的弯曲应力分析
- The influence of the force location and helix angle on the bend stresses of pinion and face-gear is discussed. 讨论了外力作用位置沿齿长方向变化与螺旋角变化时圆柱齿轮和面齿轮弯曲应力的变化规律。
- the maximal bend stress at the bottom 层底最大拉应力
- The equation gives the value of the bending stress at any distance v from the neutral axis. 此式给出了至中性轴任意距离V处的弯曲应力值。
- Stress can be the undoing of so many fine players. 紧张可能是这许多优秀选手失败的原因。
- The stream takes a sudden bend to the east. 小溪突然转向东流。
- Considering the time-variant mesh stiffness, the calculated results demonstrated the change of tooth root bending stress in one engagement period. 计算结果揭示了由于时变啮合刚度的影响齿根弯曲应力在一个啮合周期的变化规律。
- If you used a more flexible material for making these drillpipes, they would be able to sustain greater bending stress. 假如你使用一种更具挠性的材料来制造这些钻杆它们就能承受更大的弯曲应力。
- She bend over backwards to show it. 她拼命把他显露出来。
- They refused to bend to the hijackers' demands. 他们拒绝屈从于劫机者的要求。
- Find the value of the bending stress and the deflection at the center if the ribs are omitted. 如果略去肋条，求中心处的弯曲应力和挠度之值。
- Don't bend the wires down, it'll break them. 不要弯折那些线，会弄坏它们的。
- That sharp bend is a death-trap for motorists. 那个急转弯是开汽车的人的死亡陷阱。
