您要查找的是不是：
- Studied on and designed the pneumatic system for the spiral bevel gear burnishing machine. 该气动在国内是首次研究应用于数控螺旋锥齿轮研齿机。
- bevel gear burnishing machine 伞齿轮研齿机
- gear burnishing machine 齿轮滚光机,齿轮抛光机
- Gleason spiral bevel gear cutter. 格里森螺旋伞齿轮铣刀。
- This research results were applied to the design and manufacture of pneumatic system on numerical control spiral bevel gear lapping machine. 对数控螺旋锥齿轮研齿机的气动系统进行了研究与设计,取得了成功。
- In order to solve the difficulty in current industrial fileds, this paper discusses a way to process hard teeth of aviation spiral bevel gear in homegrownsperil bevel gear machine tools. 从解决当前生产问题出发,通过大量的生产试验,实现了在国产弧齿铣齿机上对航空弧齿锥齿轮硬齿面的刮削加工,并经全寿命台架考核,工作正常。
- In view of the field test, the burnishing principle and defaults of the burnish machine are analyzed. 通过对复合材料生产线中打磨机存在的打磨缺陷进行分析，并结合现场实验，对打磨机理进行了研究。
- Bevel gear is usually machined by gear hobbing machine and gear shaper,which are expensive and lead to biggish products. 国内斜齿轮加工一般采用滚齿机或者进口插齿机,由于产品体积过大和机床价格昂贵而受到限制。
- Our main products: reducer, gear motor, bevel gear, worm-gear motor, cycloidal reducer and variator. 公司主要产品有：齿轮减速机；蜗轮蜗杆减速机；螺旋伞齿轮减速机；摆线针轮减速机及无级变速器。
- The burnish machine is used for surface treatment before the cold rolling for compound material, and hence is one of the key installations for compound material production. 摘要冷连轧复合材料打磨机用于复合材料冷连轧前的表面处理，是钢基复合冷连轧材料生产的关键设备之一。
- The parametric modeling method for loxodrome normal circular-arc spiral bevel gear was presented. 给出了斜航式法向圆弧螺旋锥齿轮的参数化建模方法。
- The inferential reasoning based on the mathematical model of straight bevel gear mating surface in project application. 推导基于工程应用的直齿圆锥齿轮啮合面的数学模型。
- In view of the field test, the burnis hing principle and defaults of the burnish machine are analyzed. 通过对复合材料生产线中打磨机存在的打磨缺陷进行分析,并结合现场实验,对打磨机理进行了研究。
- Spur gear (SGA) or compound bevel gear (BGA) attachments can be provided in any position shown in Figure 1. 如果采用正齿轮(SGA)或复合伞齿轮(BGA)附件，则可以在图1中显示的各个位置安装手轮。
- The theoretical analysis research of spiral bevel gear lapping with dynamic force is carried out. 该研究是国内首次对螺旋锥齿轮动态力研齿进行的理论分析研究。
- All valves can be furnished with handwheels, chainwheels and bevel gear handwheels and chainwheels. 所有阀门都可以配置手轮、链轮和锥齿轮手轮和链轮。
- The burnish machine is used for surface treatment before the cold rolling for compound material, and hence is one of the key inst allations for compound material production. 冷连轧复合材料打磨机用于复合材料冷连轧前的表面处理,是钢基复合冷连轧材料生产的关键设备之一。
- Bevel gears: gears which connect two shafts at right angles. 伞齿轮:连接直角相交两轴的齿轮。
- Above result revealed that multidirectional closed die forging of spiral bevel gear was feasible. 揭示了使用复动闭式模锻模具成形小锥角螺旋伞齿轮的可行性。
- The teeth on bevel gears can be straight, spiral or hypoid. 锥齿轮的齿可以是直齿、螺旋形或准双曲面。
