您要查找的是不是：
- biaxial stresses state 双向受力状态
- biaxial stress state 双向受力状态
- This theory can be extended to biaxial stress. 这个理论能推广到双轴应力。
- A new failure criterion and elastic\|plastic constitutive relation for concrete under biaxial stresses is discussed in this paper. 讨论了混凝土在双向应力作用下的破坏准则和弹塑性本构关系。
- To analyse stress state of mandible pulled by masticatory muscles. 目的:应用有限元方法分析咀嚼肌牵动的下颌骨应力状态。
- It is proved that there is no contradiction between biaxial stress ellipse theory and practical loading condition. 采用理论推导和计算方法,对套管轴向应力计算公式进行了讨论。
- Stress ellipsoid is often used to describe the variation scope of stress state. 全应力的变化范围常用应力椭球方程和应力椭球面来描述。
- The behavior of subcritical crack growth and the effect of biaxial stress,under static load,was studied by experiments with glass specimens. 实验研究了玻璃在静载下的亚临界裂纹扩展特征及其受双向应力的影响。从而为脆性材料的可靠性和寿命评价提供理论基础和手段。
- At present, concretes and reinforced concretes are designed in uniaxial strength, but actually most of buildings are under biaxial stress. 摘要目前混凝土和钢筋混凝土建筑物多是以单轴强度为标准设计的，但实际上，大多数建筑物均处于多轴应力状态。
- All these stress states pertain to the same load. 所有这些应力状态都适合同样一个载荷。
- Aimed at the problems of the theory of biaxial stress ellipse, a new method for casing strength design under combined loads the triaxial stress theory is put forward. 针对双向应力椭圆理论存在的问题,提出了解决组合载荷下套管柱强度设计的三向应力圆理论;
- The performance of GCL will be influenced by stress state and hydrated condition. 应力状态等外界条件的变化使得GCL中膨润土孔隙比有较大的变化范围，对水和污染物在GCL中的运移也有较大的影响。
- Predict the stress state coefficient by neural network model, it can improve the precision of rolling force. 采用神经网络模型对应力状态系数进行预报，可提高轧制力的预报精度。
- Biaxial stress of ferromagnetic materials and residual stress of welding components have been measured by using the relation between Barkhausen effeet based on the law of approach to saturation magnetization and internal stress. 利用该技术，以近饱和磁化产生的巴克豪森效应与应力的关系，测量了铁磁构件的二轴应力和焊接构件的残余应力。
- The contacting trace, microstructure and stress state of fractured gas turbine tenon were analyzed. 对某烟气轮机的动叶片榫齿接触痕迹特征、组织和受力进行综合分析。
- Abstract: Objective：To analyze the stress state of a cantilevered fixed particle dentures. 文摘:目的：分析磨牙游离缺失单端固定桥修复的受力情况。
- Epoxy is the main matrix material for fiber-roinforced plastics(FRP) and is always in complicated stress state in FRP. 环氧树脂是纤维增强塑料(FRP) 的主要基体材料,它在FRP中处于复杂应力状态。
- The local stress state is improved because of the valve bearing more equable, and the valve is more secure. 最小绝对压力高于水的汽化压力,不产生汽蚀。
- Objective：To analyze the stress state of a cantilevered fixed particle dentures. 目的：分析磨牙游离缺失单端固定桥修复的受力情况。
- Fleck, N.A., “Influence of Stress State on Crack Growth Retardaion,” ASTM STP 924, Vol. 1, pp.157-183, 1988. 谢游麟，2003年3月，穿透式裂缝与表面裂缝修补之研究，国防中正理工学院，博士论文，第92页。
