您要查找的是不是：
- Bistable Trigger Circuit A trigger circuit that has two stable states. 双稳态触发器电路一种触发器电路,有两种固定状态。
- bistable trigger circuit 双稳触发电路
- The improvement of silicon-controlled trigger circuit. 可控硅触发电路的改进。
- It is perfectphase trigger circuit for arc welding power source of scr. 该相控触发电路是晶闸管整流弧焊电源的理想触发电路。
- The CMOS Schmitt trigger circuit with low voltage by the dynamic body-bias technology was presented. 提出了一种利用MOS管的体偏置技术实现的低电压施密特触发器电路 .
- The trigger circuit sensitivity well matches my expectations, it recognizes easily if one shouts at the balancer ;-). 触发电路的灵敏度以及符合我的期望，它也承认，如果一喊很容易在平衡器;-)。
- A tract: Trigger circuit, ower u ly circuit, clocking circuit and reset circuit are the mai circuit o the mai oard. 摘要：触发电路、供电电路、时钟电路、复位电路是主板上最主要的电路。
- This Schmitt trigger circuit can be suited to the deep sub-micron CMOS process and used to get rid of the noise on the input pad of the chip. 利用动态体偏置实现的施密特触发器可以适用于深亚微米芯片 ;可广泛用于滤除芯片的输入噪声 ;提高输入信号的信噪比 .
- It has specificity which possess the simplicity.High integration、easy shakedown test and reliableporformance.The trigger circuit has multifunction. 该相控触发电路不仅具有电路简单，集成化程度高，生产调试容易，性能可靠等特点；
- Aiming at the question of applying MOSFET,synchronized trigger circuit of paralleling grid electrode with high-power pulse is designed. 分析了MOSFET应用时存在的问题,并提出并联栅极强脉冲同步触发的解决方案。
- It will satisfy trigger circuit needs which is two or threeand six cannulo trigger circuit. at the same time,it hasn't requiremant for pase-sequcnce. 而且还具有多种组合，可适合两套、三套或六套触发电路的需要并对电源无相序要求。
- This article proves that the integrated chip trigger circuit could be used in cutting and welding equipment and has good effects as well. 论述了集成芯片触发电路在切焊设备中的应用是可行的,并且效果良好。
- The thyristor triphase-bridge full controllable rectification circuit is taken as main circuit of the system and the trigger circuit with saw-tooth synchronism signal is adopted. 该系统以可控硅三相桥式全控整流电路构成系统的主电路，采用同步信号为锯齿波的触发电路。
- A scheme of bidirectional thyristor phasing trigger composed by ICs is presented, and the trigger circuit fit for AC voltage regulator of inductive load is given. 提出了一种由集成电路组成的双向晶闸管移相触发器的设计方案，给出了适合于感性负载的交流调压电源的触发电路。
- The shift trigger pulse of the thyristor trigger circuit with integration amplifier is generated by comparing directly principle of three-phase AC and shift-phase control voltage. 该晶闸管触发器采用集成运数放大器,移相触发脉冲的形成是根据三相交流电的各相与移相控制电压直接比较原理实现的。
- This article introduces the characteristics of stabilize d arc circuit,sync shift-phase circuit,trigger circuit and control circuit,a lso illuminates each unit circuit. 介绍了稳弧电路、同步移相电路、触发电路及外特性控制电路的设计特点,对各单元电路进行了具体的分析。
- The triangle wave generator, which is composed of FET and operational amplifier circuit, is applied to trigger circuit of automatic phase - shift of flash lamp. It solves the technical problem to view the high frequncy vibrator. 场效应管与运算放大器组成的三角波信号发生器,用于频闪灯触发信号的自动移相,解决了观察高频振动物体的关键技术问题。
- The main and the trigger circuits of an ultrasonic frequency thyris-tor inverter are presented, which may be used in ultrasonic emulsifica-tion units. 本文提出了适用于超声乳化装置的超声频可控硅逆变器主电路和触发电路,分析了电路的工作原理,并提供了主电路的主要参数及其试验结果。
- bistable trigger action circuit 双稳触发电路
- The function of digit trigger circuit is used to turn voltage of simulate trigger circuit to a digit, one to adjust to conduction angle and more to control the trigger pulse by controlling the digit. 数字式触发电路是将模拟式触发电路中的控制电压转变成数字量,通过对数字量的控制,达到对导通角的调节,从而控制触发脉冲。
