您要查找的是不是：
- blade solid modeling 叶片实体造型
- But the Brep or solid model can’t achieve this. 边界面与实体模型很难作到这一点。
- Design experienced in solid modeling such as die castingextrusionplastic injection. 具有设计实体建模如压铸模、挤出模和注塑模的工作经验;
- Finally,the general steps of solid modeling were introduced and an instance was given. 最后介绍了实体造型的一般步骤，并加以举例说明。
- The feature-based parametric modeling technology was adopted to build virtual solid model of crankshaft. 利用基于特征的参数化建模技术对曲轴进行了虚拟原型的建立；
- The fluid flow in the funnel type mold and the expanding nozzle of the CSP-thin slab continuous casting-has been numerically studied by 3-D solid modeling and FDM programming. 以CSP薄板坯连铸漏斗型结晶器和扩张型水口为研究对象,通过对水口和结晶器三维实体几何造型,采用自行编制的有限差分程序对具有复杂结构的结晶器与水口中的流场同时进行了数值模拟。
- Using the method can quicken the speed of building solid model bank and has actual significance to build complicated scene fleetly. 运用此方法可加快三维模型库的建立，对于复杂场景的快速搭建有实际意义。
- The representation and abstract method of the feasible clamping face of a part from the solid model are proposed. 本文提出基于实体模型的工件的可行夹紧表面信息的提取与表示方法，从零件信息中提取可行的装夹表面信息；
- Based on the Advanced Model Extension (AME) for AutoCAD,a solid modeling for landing gears and control systems is studied. 本文基于微机AutoCAD平台下实体造型扩展AME研究飞机起落架及操纵系统实体造型。
- Based on the Advanced Model Extension (AME) of AutoCAD R12.0, solid modeling techniques applied to aircraft landing gear constructions are studied. 基于微机AutoCAD平台下的实体造型扩展AME研究飞机起落架实体造型。
- The formulas of heat of vaporization and vapor pressure are derived, for the Einstein and Debye solid model. 用固体的Einstein模型与Debye模型分别导出了相应模型的固气相变的蒸发热和蒸发压公式;并对其做了数值计算.
- The formulas of vapor heat and of vapor pressure is derived and computed by the Enistein and Debye solid model. 用固体的Einstein模型与Debye模型分别导出相应模型的固气相变的蒸发热和蒸发压公式,并对其做了数值计算。
- NC machining program was generated after solid modeling with UG, and NC machining of the globoid indexing cam could be implemented. UG实体造型完成后生成数控加工程序，实现对弧面分度凸轮的数控加工。
- The invader thrust the blade of his bayonet into the woman's heart. 侵略兵把刺刀的刀身刺入那个妇人的心脏。
- The solid modeling based on STL dare mesh instead of the one based on surface is created to increase morphological comparability. 本文以基于STL数据的网格实体建模代替传统的曲面实体建模，提高了模型的几何相似性；
- Reading and dimensioning of the complicated assembly-drawings are explained in course of 3D solid modeling by giving examples. 在三维造型过程中阐述复杂零件的读图和尺寸标注方法，并通过实例进行说明。
- A rabbit get catch in the blade of the reaper. 一只兔子被卷到收割机的刀刃中去了。
- Results The accurate solid model of masticatory muscles and mandible was reconstructed and t... 结论在可视化人体超薄切片基础上,所确定的咀嚼肌三维肌力向量更符合生理状况。
- The blade is chipped in a few places. 刀锋有几个地方缺口。
- A material feature-based heterogeneous solid model was developed to represent the heterogeneity of biomaterials. 为表达生物材料的非均质性,提出基于材料特征的非均质实体模型。
