您要查找的是不是：
- Bond strength is an important parameter for wafer bond. 键合强度是关系到键合好坏的一个重要参数。
- The effect of thermocycling on the microtensile bond strengths of three adhexives to normal vs. 与相似的文献。
- The bond strength experiment of dogtooth exposed to pulsed Nd: YAG laser[J]. 引用该论文 朱建中;黄炜;许肖杰;林斌;陈钰清;顾锡荣.
- The magnitude of the bond strengths on different repaired positions keeps to the order from top to flank to underside. 不同修补方位的黏结强度基本上遵循顶面大于侧面、侧面大于底面的规律。
- Xeno III Adhesive provides bond strength comparable to total etch systems. 异种三胶粘剂粘结强度可比提供总额蚀刻系统。
- There were no statistical differences between the shear bond strengths of carbon fiber post (2.4MPa) and cast Ni-Cr alloy post (3.8MPa). 剪切粘结强度 (MPa) :碳纤维桩 (2 4 )、镍铬合金桩 (3 8) ,IPS Empress 2全瓷桩未与水门汀分离前断裂。
- Indirect methods to measure the interface bond strength include the interlaminar shear strength test. 测量界面粘结强度的间接方法包括层间剪切强度试验。
- There were no significant differences statistically both in shear bond strengths( t=1.542, P >0.05) and in ARI scores ( Hc=0.000, P >0.05) between the two kinds of bracket bases. 两种底板托槽之间的抗剪切强度比较 ;差异无显著性(t=1.;5 4 2;P >0
- Finally, the bond strength of FRP bars to epoxy resin and cement grout is also studied. 同时对纤维塑料筋与水泥装和环氧树脂的粘结强度也进行了探讨。
- Bond strength between tooth and base bracket with two bracket base designs: An in vitro comparative study. 两种底板托槽体外粘结强度的对比研究。
- The shear bond strength of titanium and its alloys with SOLIDEX veneering resin. 钛钛合金牙粘结复合树脂。
- The bond strength of Ni-P coating on Mg alloy AZ91D is studied with metalloscope,SEM,EDS. 利用金相显微镜、SEM、能谱仪(EDS),研究了镁合金AZ91D的化学镀Ni-P的结合强度。
- It can be concluded that the bond strength of Tyrian/One-Step Plus has a comparable high value under microtensile test. Tyrian/One-StepPlus黏结系统的黏结性能最好。
- Insulating ability and peel bond strength are two important properties for thermal insulating covering. 保温性能和剥离强力是保温被两个非常重要的性能指标。
- Bond strength you can test up to through the use of the avulsing test, or test a consistent reference samples. 粘合强度可以通过采用测试盘进行剥离测试，或测试某个质量稳定的参考样本。
- Finally,the bond strength of FRP bars to epoxy resin and cement grout is also stu... 同时对纤维塑料筋与水泥浆和环氧树脂的粘结强度也进行了探讨。
- Bending strength, compressive strength, interfacial bond strength and frost-resistance are also studied and analyzed. 并对修补混凝土的抗折、抗压、新老界面粘结强度以及抗冻性等进行了试验研究。
- The great viscosimetry onusseit, its solid water with high, in the small, cohesion, bond strength can vary widely. 粘度大的胶粘剂，其固体含里高，水分少，内聚力大，粘结强度也大。
- Objective: To compare the bond strength of ceram ic - metal among three kinds of precious alloys and Ni - Cr alloy. 目的:比较3种贵金属合金和镍铬合金与瓷的金瓷结合强度。
- The effect of the MMT content on the bond strength was studied by testing the tensile strength of sanding core. 通过砂芯抗拉强度的测定，研究了MMT的用量等因素对粘结强度的影响；
