您要查找的是不是：
- cantilever beam impact test 悬臂梁式冲击试验
- Test Method for Unnotched Cantilever Beam Impact Strength of Plastics 塑料的无凹口悬臂梁抗冲击强度的试验方法
- cantilever beam impact tester 悬臂梁式冲击试验机
- All the cars must experience an impact test. 所有小汽车都必须经过碰撞试验。
- Force-measuring elements employ either a cantilever beam or a column arrangement. 测力元件采用悬臂梁或柱的形式。
- Finite element design, cantilever beam withstanding load distortion situation, some graphical displays. 详细说明:有限元设计,悬臂梁承受荷载的变形情况,有图形显示。
- The dynamics of a cantilever beam attached to a rotating rigid body is reported in this paper. 摘要本文对固结在转动刚体上柔性梁的动力学问题进行了研究。
- By reviewing relevant literatures, it is known that the design model is similar to the cantilever beam structure. 中文摘要植牙术后的骨整合程度，关系到手术是否成功。
- Dynamical characteristics of the cantilever beam were analyzed and its dynamical equation was developed by using PEA. 采用有限元分析方法研究悬臂梁的动态特性，建立其动力方程。
- A cantilever beam was experimentally studied with this method and the result is consistent with theoretical result. 以悬臂梁为例进行实验研究，实验结果与理论计算结果吻合较好。
- With hoisting method by double cantilever beam,the hoisting of large steel trusses was get success. 双悬臂梁吊装法解决了大型钢桁架高空吊装问题,且省工、省料,实践证明,该法安全、可靠,较为实
- The shear strength of COG and COF bonded with ACF is studied by impact test. 摘要采用冲击试验方法研究了各向异性导电胶膜(ACF)互连的玻璃和柔性基板上倒装芯片（COG和COF）的剪切结合强度。
- The structure consists basically of two cantilever beams. 这种结构基本上由两根悬臂梁组成。
- Cantilever beam of key strata breaks and caves into blocks,which is periodic weighting of mining face. 关键层悬臂梁破断垮落成承压砌块,其垮落及沿架后切落,形成工作面周期来压。
- L-BS type cantilever beam load cell, with one end fixed, another end loaded, steel ball transfering force, it has a good sealed structure. L-BS型钢制悬臂梁式称重传感器,一端固定、一端加载,钢球传力,并设有良好的密封结构。
- This paper performed a flexural test of 6 full-scale continuous beams and 2 full-scale cantilever beams with development lengths of negative reinforcements in two batches. 本文完成了负弯矩钢筋分两批切断的六根足尺约束梁和两根足尺悬臂梁的弯曲破坏试验。
- Active vibration control for a cantilever beam was studied based on the combination between finite element analysis (PEA) and modal control. 摘要结合有限元分析方法与模态控制来抑制悬臂梁的振动。
- The experiment result shows that the compensation of convex corners and short corners of cantilever beam in EPW by the method. 实验结果表明，该方法能够较好的完成对EPW腐蚀液中悬臂梁凸角削角的补偿。
- The validity of the expression was verified by the instrumented impact test and caustic test results for HQ785C steel. 分别采用受惯性效应影响的示波冲击试验及无惯性效应的焦散线技术对HQ785C钢进行了动态测试，验证了修正公式的有效性。
- The experiment results show that the vibration of flexible cantilever beam can be effectively suppressed by using the independent mode control method. 实验结果表明,使用独立模态控制方法,能有效地抑制悬臂梁的振动,控制效果非常明显。
