您要查找的是不是：
- Differential scanning calorimetry(DSC), electron probe microanalysis(EPMA) and rapid solidification were adopted to study the effects of Ni and Mn on the microstructure, solidification process and aging hardening characteristics of Al Si Cu Mg alloy. 采用DSC差热分析及急冷试验方法并辅以微区成分分析 ,探讨了Ni和Mn对Al Si Cu Mg四元合金凝固组织、凝固过程及时效硬化特性的影响。
- The microstructure, mechanical properties and deformation characteristics have been studied for a cast Al Si Mg alloy A357 treated under different aging conditions. 研究了Al?Si?Mg系A357合金在不同时效状态下的显微组织、力学性能及形变特性。
- Quantitative Metallographic Analysis for Morphology Change of Eutectic Silicon in Al Si Cu Mg Hypoeutectic Casting Alloy during the Solution Heat Treatment 亚共晶铝硅铜镁铸造合金共晶硅相在固溶处理过程中形貌变化的定量金相分析
- Al Si Cu RE Series Diecasting Alloy 铝硅铜稀土压铸合金
- It also presents the research trend of cast Al?Si alloy. 对铸造Al?Si合金以后的研究方向提出了看法
- EFFECT OF TRACE Sc AND Zr ON GRAIN REFINEMENT OF AS CAST Al Mg ALLOYS 微量Sc和Zr对Al-Mg合金铸态组织的晶粒细化作用
- Abstract: Deformation inhomogeniety of an Al Li Cu Mg Zr alloy was experimentally studied using isothermal compression at elevated temperatures. 采用等温压缩试验研究了一种Al?Li?Cu?Mg?Zr 合金高温塑性变形过程中的不均匀变形现象。
- Abstract By addition of a reactant with stoichiometric ingredient of Ti and B to molten Al Si alloy,a particulate reinfaced cast TiB 2/Al Si composite by in situ reaction has been achieved. 在铝硅合金熔体中加入Ti和B成理想配比的反应剂，原位生成颗粒增强铸造复合材料TiB2/Al?Si。
- The proper RE addition to cast Al melt can obviously de crease amounts of gas/pin hole in solidified alloy. 铸铝合金在熔炼的过程中,加入适量稀土可以明显减少凝固后合金中气孔、针孔的数量。
- The microstructure of a Al Si eutectic alloy has been investigated by TEM,SEM and EPMA. 观察分析了铝硅二元共晶合金的显微结构。
- Since its chemical character is very active, Mg alloy is prone to oxidation and burning, which makes it impossible to be melted and cast in air. 但由于镁的化学性质活泼，非常容易氧化、燃烧，导致镁合金无法在大气条件下直接进行熔炼和浇注。
- Abstract: The microstructure of AZ61 Mg alloy made by the methods of normal cast and twin-screw rheo-cast was investigated. 摘 要: 采用双螺旋流变铸造技术制备镁合金AZ61铸锭，并与常规铸造组织进行对比。
- Small amounts of sample on miligram scale are taken from the fracture surface of a casting Al Cu alloy, and its main constituents are determined by FAAS (for Cu, Mn and Cd) and GFAAS ( for Ti). 研究了铸铝铜合金拉伸断口毫克级样品中主成分铜、锰、镉的火焰原子吸收光谱法(FAAS)和钛的石墨炉原子吸收光谱法(GFAAS)。
- A partially reinforced Al Si alloy matrix composite piston produced by squeeze casting technique has a firm interface between reinforced and unreinforced... 挤压铸造工艺生产的局部增强铝基复合材料活塞,界面结合可靠、成品率高、工艺兼容性好,作为新型活塞材料,已在我国发动机行业应用并达到批量生产。
- Microstructures and wear resistance of spray formed Al Pb alloys were studied and compared with those of conventional cast Al Pb alloy. 研究了喷射沉积成形Al?Pb 合金的显微组织及耐磨性能， 并与铸态Al?Pb 合金进行了对比。
- Refining effect of boron on the hypoeutectic Al Si alloys and pure aluminum has been studied with SEM and XRD. 利用DSC，SEM 和X 射线衍射等手段， 分析了硼对纯铝及亚共晶Al?Si 合金的细化作用。
- For the calculation of Al Si Fe ternary system, the method is simpler than another analysis method. 对于Al?Si?Fe 三元系的计算，Bonnier 法比其它解析计算方法简单
- Al alloy and Mg alloy are the most widely used light alloys, so it is very significant to apply EPM to preparation and process of this kind of material. 铝镁类轻合金是世界上使用最多的轻质合金，将材料电磁工艺用于此类材料的制备和加工过程中有着重要的意义，围绕电磁场对铝镁合金组织性能影响规律的研究是充分利用好这一工艺的关键。
- The microstructure,resistivity and mechanical property of Al Si Mn Fe alloys are studied. 试验研究了Al?Si?Mn?Fe 合金的金相组织、电阻率和力学性能。
- The modifying elements used in hypoeutectic Al Si alloys,besides Na,there are also Sr,Te,Ba,Sb,K,RE,B,S,etc. 亚共晶铝硅合金的变质元素除钠以外,还有锶、碲、钡、锑、钾、稀土、硼、硫等。其中,应用较多的是含钠和锶的变质剂。
