您要查找的是不是:
- Objective To study the enclasp forces of cast clasp and forging clasp. 目的 研究铸造卡环和锻造卡环的卡抱力。
- Objective\ To study the enclasp forces of cast clasp and forging clasp. 目的研究铸造卡环和锻造卡环的卡抱力。
- Casting clasp between teeth (CCBT) is set up between buccal arid lingual embrasure of two abutment teeth. 方法:在两基牙间的颊、龈外展隙内设置牙间卡(发夹卡)。
- Objective To investigate the elastic limit and relevant enclasp force of the non-precious metal casting clasp. 目的 研究非贵金属铸造卡环的弹性极限及其相应卡抱力。
- Methods: Casting clasp between teeth(CCBT) is set up between buccal and lingual embrasure of two abutment teeth. 方法:在两基牙间的颊、龈外展隙内设置牙间卡(发夹卡)。
- Methods: Casting clasp between teeth (CCBT) is set up between buccal arid lingual embrasure of two abutment teeth. 方法:在两基牙间的颊、龈外展隙内设置牙间卡(发夹卡)。
- The average percentage of Actinomyces Viscosus increased less after wearing casting clasp RPD than that of wrought wire clasp. 冷弯卡环组初戴一周后,上述细菌百分比分别上升了5.;9%25和3
- When Ti75 was first used to manufacture cast clasp, it possessed good fatigue resistance, and thus it was a suitable alloy to manufacture casting denture clasp. 加力后,TA2、Ti-6hl-4V的疲劳强度降低,Co-Cr、Ti75的疲劳强度增加。
- Abstract: Objective To study the enclasp forces of cast clasp and forging clasp. 摘 要: 目的研究铸造卡环和锻造卡环的卡抱力。
- Under the same loading,the casting clasp was made the largest stress distribution on the cervical tissue of abutment, but on the supporting tissue of alveolar bone,the elastic clasp was made the largest stress. 在相同加载条件下 ,铸造卡环对牙颈部牙周组织产生的应力最大 ,隐形义齿对支承牙槽嵴产生的应力最大。
- Methods Casting clasp samples of five cobalt-chromium alloys and one 18-8 nickel-chromium alloy were made from prefabricated clasp wax by invesing,casting,sandblasting,and ultrasonic cleaning. 方法 成品磨牙铸造卡环蜡经包埋、铸造、喷砂、超声波清洗后制得 5种钴铬合金和 1种 18 8镍铬不锈钢铸造卡环试件。
- Objective:Compare the stress of abutment and its surface supporting tissues with forging clasp or with casting clasp or with elastic clasp retained both extention removable partial dentures(RPD). 目的 :比较在局部可摘义齿修复中锻造卡环、铸造卡环和隐形义齿对基牙牙周组织表面应力的差异。
- The Enclasp Forces of Cast Clasp and Forging Clasp 铸造卡环和锻造卡环的卡抱力
- In clinic,we should select the suitable undercut deepness wherein the cobalt-chromium alloy casting clasps,according to different brands of the casting alloy,undercut length,undercut slope,and the clasp thickness. 在临床工作中 ,应根据不同厂商生产的铸造钴铬合金 ,结合倒凹长度、坡度及卡环粗细选择进入倒凹的深度 ,以获得较理想的固位效果。
- The elastic limit and the relevant enclasp force of the casting clasp made from the l 8-8 nickel-chromium alloy were smallest and those of the clasps made from the cobalt-chromium alloys in various brands were different. 不同品牌的钴铬合金铸造卡环弹性极限及其相应卡抱力不同 ,18 8镍铬不锈钢铸造卡环的弹性极限及其相应卡抱力最低。
- I can't bear young people casting away their youth. 我无法忍受年轻人虚掷青春。
- He held her hand in a firm clasp. 他紧握她的手。
- The clasp of my brooch is broken. 我胸针的钩子断了。
- That volcano cast forth lots of lava and ashes. 那火山喷了出大量熔岩和灰烬。
- Casting Clasp between Teeth Used for the Removable Partial Denture 铸造牙间卡用于可摘局部义齿修复