您要查找的是不是：
- The variation of polarizing potential made a little influence on the cathodic disbonding performance of 3PE coating under a certain condition. 结果表明，在一定的条件下，极化电位的变化对3PE涂层的阴极剥离性能影响不大。
- Keywords 3PE coating;Cathodic disbonding;Pipeline;Cathodic protection; 3PE涂层;阴极剥离;管道;阴极保护;
- The results show that the efficiency of stainless steel flakes and glass flakes to improve the cathodic disbondment was better than that of mica powder. 结果表明,玻璃鳞片及不锈钢鳞片对涂层的耐阴极剥离性能的提高要好于云母鳞片;
- Standard Test Method for Cathodic Disbonding of Pipeline Coatings by Laboratory Simulation of Soil Burial 通过土壤埋葬的试验室模仿对管道涂层的阴极非结合的标准试验方法
- 3LPE coating,consisted of epoxy powder,copolymeter adhesive and polyethylene,has a perfect performance in corrosion control and cathodic disbonding resistance. 三层PE防腐层由环氧粉末、共聚物胶粘剂、聚乙烯组成,具有耐腐蚀和抗阴极剥离的特性。
- cathodic disbonding 阴极分离
- Impressed current cathodic protection system for s. 船体外加电流阴极保护系统。
- Change the Zink block of cathodic Protection. 换阴极保液用的锌棒。
- Standard Test Method for Cathodic Disbondment Test of Pipeline Coatings (Attached Cell Method) 管道覆层阴极剥离检测的测试方法(化学腐蚀电解槽法)
- Keywords Spray Polyurea Coating;Polyurea/Metal adhesion;Cathodic disbondment;Amine terminated Polyether; 聚脲涂料;聚脲/金属附着力;阴极剥离;端氨基聚醚;
- cathodic disbondment test 阴极脱胶试验
- The cracking of hydrogen-induced disbonding was studied through a series of electro1ytic hydrogen charging tests. 本文通过一系列电解充氢试验研究了不锈钢堆焊层的氢致剥离断裂。
- With these performance of '3 layers' PE anticorrosive system , there was no disbonding problem due to the over-protection po... 分析表明,由于"三层"聚乙烯(PE)防腐蚀层上述性能优异,采用牺牲阳极时无需考虑"过保护"导致剥离的问题。
- The influence of PWHT conditions on hydrogen-induced disbonding were studied through a series of electrolytic hydrogen charging tests. 通过一系列电解充氢试验比较了不同焊后热处理条件对不锈钢堆焊层氢致剥离的影响。
- Magnetron it is characterized by small weight and a low level of the SHF radiation from a cathodic leg. 其特点在于小的重量和低的阴极超高频辐射。
- The studies show that the rise of tempering parameter and the increase of the width of carburized zone will promote the tendency of disbonding. 结果表明，提高焊后热处理参数，熔合线堆焊层侧增碳层宽度增加，氢致剥离的倾向增大。
- So in the solution studied the HSI anode could be used in pulsed current cathodic protction system. 因此，在所研究的介质中高硅铸铁阳机可以用于方波脉冲电流阴极保护。
- The results show that the rise of tempering parameter and the increase of the width of carburized zone will promote the tendency of disbonding. 结果显示,提高焊后热处理参数,熔合线堆焊层侧增碳层宽度增加,氢致剥离的倾向也增大。
- The results of the experiments show that the technique is a rapid, effective method for the disbond detecting of solid propellant rocket motors. 实验研究结果表明,该技术可对固体火箭发动机钢筒与绝热层之间的脱粘作快速有效的检测。
- The factors influencing hydrogen-induced disbonding were studied through a series of electrolytic hydrogen charging tests. 通过电解充氢试验研究了不锈钢堆焊层剥离断裂的影响因素，并着重分析了这一断裂问题的金属学本质。
